Current config below:
In my network I have unbound redirecting some sites through the proxy
server and checking authentication, If I redirect www.thisite.com it
works corectly. However, as soon as SSL is used https://www.thissite.com
it doesn't resolve at all. Any ideas what I have to do to enable ssl
redirects in unbound or squid?
Handle port 443 traffic and the encrypted traffic there.
You are only receiving port 80 traffic in this config file.
I am already redirecting 443 traffic but the proxy won't pick it up.
There is a SSL ports directive in the squid.conf so it should accept them?
For example, this line redirect all HTTP traffic but as soon as the
browser wants a SSL connection, it is dropped:
local-data: "anywhere.mysite.com. 600 IN A 109.xxx.xx.xxx"
local-zone: "identity.mysite.com." redirect
external_acl_type time_squid_auth ttl=5 %SRC /usr/local/bin/squidauth
What does this helper do exactly to earn the term "authentication"?
TCP/IP address alone is insufficient to verify the end-users identity.
This helper checks that an IP address is contained within a database table.
If the IP address exists, then it allows them to use the proxy server.
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
#http_access deny to_localhost
external_acl_type time_squid_auth ttl=5 %SRC /usr/local/bin/squidauth
acl interval_auth external time_squid_auth
http_access allow interval_auth
#http_access allow all
# And finally deny all other access to this proxy
http_access deny all
# Squid normally listens to port 3128
http_port 80 accel vhost allow-direct
hierarchy_stoplist cgi-bin ?
#cache_dir ufs /var/spool/squid 100 16 256
coredump_dir /var/spool/squid
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
