Hello Dear Everyone: > > i config wccp mode recently , but i found http request don't succeed > to be sent via gre tunnel at wccp mode . > > This is my config , if possible , give me some advisement , Thanks again. > > > > 19:36:58.728514 IP 192.168.5.66.37225 > 180.149.132.165.http: Flags > [F.], seq 0, ack 1, win 108, length 0 > 19:37:00.304327 IP 192.168.5.66.41485 > > rev.opentransfer.com.28.147.130.98.in-addr.arpa.http: Flags [S], seq > 2204475760, win 5840, options [mss 1460,sackOK,TS val 3757970 ecr > 0,nop,wscale 6], length 0 > 19:37:00.976403 IP 192.168.5.66.40789 > 202.104.237.103.http: Flags > [S], seq 2214840108, win 5840, options [mss 1460,sackOK,TS val 3758139 > ecr 0,nop,wscale 6], length 0 > 19:37:03.597139 IP 192.168.5.66.58461 > 101.226.142.33.http: Flags > [.], ack 2180972149, win 227, options [nop,nop,TS val 3758794 ecr > 2556809136], length 0 > 19:37:03.806973 IP 192.168.5.66.58461 > 101.226.142.33.http: Flags > [.], ack 1, win 227, options [nop,nop,TS val 3758846 ecr > 2556809198,nop,nop,sack 1 {0:1}], length 0 > 19:37:03.976184 IP 192.168.5.66.40789 > 202.104.237.103.http: Flags > [S], seq 2214840108, win 5840, options [mss 1460,sackOK,TS val 3758889 > ecr 0,nop,wscale 6], > > > 19:06:33.356333 IP 192.168.5.1 > 192.168.2.2: GREv0, length 48: > gre-proto-0x883e > 19:06:33.388306 IP 192.168.5.1 > 192.168.2.2: GREv0, length 48: > gre-proto-0x883e > 19:06:33.388565 IP 192.168.5.1 > 192.168.2.2: GREv0, length 48: > gre-proto-0x883e > 19:06:33.604188 IP 192.168.5.1 > 192.168.2.2: GREv0, length 48: > gre-proto-0x883e > 19:06:38.187049 IP 192.168.5.1 > 192.168.2.2: GREv0, length 60: > gre-proto-0x883e > 19:06:41.931862 IP 192.168.5.1 > 192.168.2.2: GREv0, length 48: > gre-proto-0x883e > 19:06:42.434829 IP 192.168.5.1 > 192.168.2.2: GREv0, length 48: > gre-proto-0x883e > 19:06:55.047736 IP 192.168.5.1 > 192.168.2.2: GREv0, length 48: > gre-proto-0x883e > > > > *Mar 8 12:48:05.300: WCCP-EVNT:S00: Here_I_Am packet from 192.168.2.2 > w/bad rcv_id 00000000 > *Mar 8 12:48:05.300: WCCP-PKT:S00: Sending I_See_You packet to > 192.168.2.2 w/ rcv_id 00002378 > *Mar 8 12:48:05.300: IP: tableid=0, s=192.168.2.1 (local), > d=192.168.2.2 (Ethernet1/0), routed via FIB > *Mar 8 12:48:05.304: IP: s=192.168.2.1 (local), d=192.168.2.2 > (Ethernet1/0), len 168, sending > *Mar 8 12:48:05.580: IP: tableid=0, s=192.168.5.1 (local), > d=192.168.5.66 (FastEthernet0/1), routed via FIB > *Mar 8 12:48:05.584: IP: tableid=0, s=192.168.5.1 (local), > d=192.168.5.66 (FastEthernet0/1), routed via FIB > > *Mar 8 12:48:15.119: IP: tableid=0, s=192.168.2.2 (Ethernet1/0), > d=192.168.2.1 (Ethernet1/0), routed via RIB > *Mar 8 12:48:15.119: IP: s=192.168.2.2 (Ethernet1/0), d=192.168.2.1 > (Ethernet1/0), len 172, rcvd 3 > *Mar 8 12:48:15.123: WCCP-PKT:S00: Received valid Here_I_Am packet > from 192.168.2.2 w/rcv_id 00002378 > *Mar 8 12:48:15.123: WCCP-PKT:S00: Sending I_See_You packet to > 192.168.2.2 w/ rcv_id 00002379 > *Mar 8 12:48:15.123: IP: tableid=0, s=192.168.2.1 (local), > d=192.168.2.2 (Ethernet1/0), routed via FIB > *Mar 8 12:48:15.123: IP: s=192.168.2.1 (local), d=192.168.2.2 > (Ethernet1/0), len 168, sending > *Mar 8 12:48:15.299: IP: tableid=0, s=192.168.2.2 (Ethernet1/0), > d=192.168.5.1 (FastEthernet0/1), routed via RIB > *Mar 8 12:48:15.299: IP: s=192.168.2.2 (Ethernet1/0), d=192.168.5.1, > len 172, rcvd 4 > *Mar 8 12:48:15.299: WCCP-EVNT:S00: Here_I_Am packet from 192.168.2.2 > w/bad rcv_id 00000000 > *Mar 8 12:48:15.299: WCCP-PKT:S00: Sending I_See_You packet to > 192.168.2.2 w/ rcv_id 0000237A > > > > > > > ******************************************************************** > squid config > ******************************************************************** > > wccp2_router 192.168.2.2 > > wccp2_address 192.168.0.1 #interface ip address > > wccp_version 4 > > wccp2_forwarding_method 1 # Gre for 1 L2rewriting for 2 > > wccp2_return_method 1 # Gre for 1 L2rewriting for 2 > > wccp2_assignment_method 1 Gre for 1 L2rewriting for 2 > > wccp2_weight 5 > > ********************************************************************* > other environment ( ip tunnel & iptables ....) > ********************************************************************* > > first step > > modprobe ip_gre > > ip tunnel add wccp0 mode gre remote 192.168.5.1 local 192.168.2.2 dev eth1 > > > second step > > ip addr add 10.1.1.2/24 dev wccp0 > ip route add 10.1.1.0/24 dev wccp0 > ip link set wccp0 up > > Or > > ifconfig wccp0 10.1.1.2 netmask 255.255.255.0 up > route add -net 10.1.1.0 netmask 255.255.255.0 dev wccp0 > > > third step > > echo 0 >/proc/sys/net/ipv4/conf/wccp0/rp_filter > echo 0 >/proc/sys/net/ipv4/conf/eth1/rp_filter > echo 1 > /proc/sys/net/ipv4/ip_forward > > fouth step > > iptables -P INPUT ACCEPT > iptables -P OUTPUT ACCEPT > iptables -P FORWARD ACCEPT > iptables -A INPUT -i lo -j ACCEPT > iptables -A OUTPUT -o lo -j ACCEPT > iptables -A INPUT -i wccp0 -m state --state ESTABLISHED,RELATED -j ACCEPT > iptables -A FORWARD -i wccp0 -j ACCEPT > iptables -t nat -A PREROUTING -i wccp0 -p tcp -m tcp --dport 80 -j > REDIRECT --to-ports 3128 > iptables -t nat -A POSTROUTING -o eth1 -j SNAT --to-source 192.168.2.2 >