Yemen, what router do you use for going to the internet? Regular linux box? Or something else? Regards HASSAN On Tue, Jul 8, 2014 at 8:18 PM, babajaga <augustus_meyer@xxxxxxxx> wrote: > Not percentagewise, only in absolute values. > > I had problems myself to vaguely understand at least the doc about > delay_pools, look into the documented squid.conf. So somebody else should > answer your detailed questions, if any. > However, > I use it to put an upper limit of 125kbit/s download speed to every user > having this simple config (squid2.7): > ..... > delay_pools 1 #Just one pool > delay_class 1 2 #class 2 > delay_access 1 allow all #everybody will be throttled; you might set up > another pool allowing higher badwidth > delay_parameters 1 -1/-1 125000/125000 #125kbit/s; no bursts. You might > allow > #delay_parameters 1 -1/-1 125000/250000 #... 250kbit/s burst rate, for > initial page load > > which should be adequate for interactive browsing. As you have 6MBit WAN, > this should also leave quite some spare bandwidth for non-proxied traffic, > as not all of your 30 users will be hitting the <enter> button > simultaneously to load another page. > > > > > -- > View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/Re-split-the-connexion-using-Squid-tp4666739p4666745.html > Sent from the Squid - Users mailing list archive at Nabble.com.
