On 4/06/2014 11:51 a.m., Nidal Shater wrote: > > I have install squid on my centos 6.5 using yum, the following is the content of the squid.conf > > # > # Recommended minimum configuration: > # > acl manager proto cache_object > acl localhost src 127.0.0.1/32 ::1 > acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 > > # Example rule allowing access from your local networks. > # Adapt to list your (internal) IP networks from where browsing > # should be allowed > acl localnet src 10.0.0.0/8 # RFC1918 possible internal network > acl localnet src 172.16.0.0/12 # RFC1918 possible internal network > acl localnet src 192.168.0.0/16 # RFC1918 possible internal network > acl localnet src fc00::/7 # RFC 4193 local private network range > acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines > > acl SSL_ports port 443 > acl Safe_ports port 80 # http > acl Safe_ports port 21 # ftp > acl Safe_ports port 443 # https > acl Safe_ports port 70 # gopher > acl Safe_ports port 210 # wais > acl Safe_ports port 1025-65535 # unregistered ports > acl Safe_ports port 280 # http-mgmt > acl Safe_ports port 488 # gss-http > acl Safe_ports port 591 # filemaker > acl Safe_ports port 777 # multiling http > acl CONNECT method CONNECT > > # > # Recommended minimum Access Permission configuration: > # > # Only allow cachemgr access from localhost > http_access allow manager localhost > http_access deny manager > > # Deny requests to certain unsafe ports > http_access deny !Safe_ports > > # Deny CONNECT to other than secure SSL ports > http_access deny CONNECT !SSL_ports > > # We strongly recommend the following be uncommented to protect innocent > # web applications running on the proxy server who think the only > # one who can access services on "localhost" is a local user > #http_access deny to_localhost > > # > # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS > # > > # Example rule allowing access from your local networks. > # Adapt localnet in the ACL section to list your (internal) IP networks > # from where browsing should be allowed > http_access allow localnet > http_access allow localhost > > # And finally deny all other access to this proxy > http_access deny all > > # Squid normally listens to port 3128 > http_port 3128 > > # We recommend you to use at least the following line. > hierarchy_stoplist cgi-bin ? > > # Uncomment and adjust the following to add a disk cache directory. > #cache_dir ufs /var/spool/squid 100 16 256 > > # Leave coredumps in the first cache dir > coredump_dir /var/spool/squid > > # Add any of your own refresh_pattern entries above these. > refresh_pattern ^ftp: 1440 20% 10080 > refresh_pattern ^gopher: 1440 0% 1440 > refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 > refresh_pattern . 0 20% 4320 > > > My questions are : > 1 - why there isn'any "log_fqdn on" option There are hundreds of configuration directives, most of which are able to be given sensible** defaults. There is no need for them to be in the config file and confusing you. You can visit http://www.squid-cache.org/Doc/config/ for the full list at any time you want to find something. There should also be a squid.conf.documented file installed somewhere on your machine with the full list and documentation of each directive. ** Relative to when they were last updated anyway. > 2- why there isn't "logformat squid %ts.%03tu %6tr %>a %Ss/%03>Hs %<st %rm %ru %[un %Sh/%<a %mt" option It is abuilt-in definition and does not need re-defiing. Also, the above is provided as documentation to explain what the native fields order and content it. The actual native log syntax has a few differences in some value ranges from the above format. > 3- I have tried to add it to the conf. file above but when I did it the squid failed to restart Please run the command "squid -k check" after changing the config file and before reconfiguring the running Squid instance. That verifies the config and displays helpful hints about any problems found. Amos
