hi all , ive tried cenots6.4 64 bit with32 G ram with squid 3.4.3 with tptoxy , but the cpu cores are not balanced !!! this machine is delr720 it has 24 cores , before i go to try on this machine, i tried it on quad core machine with same config squid file and it gave me equal sharing among 8 cores of cpu . but when i tried the same config and same kernel and same squid and same os on delr720 which has 24 cores cpu , i found that process of squid are only distributed on about 5 cores from total of 25 core !!!!! my question is , does squid depend on hardware core cpu ? does that mean squid SMP compatibale with some hardware and not with others ??? ====================================== ive pumped about 1000 ips to squid and here is a snapshot with cores which are un balanced ! those are cores of delr720 <http://squid-web-proxy-cache.1019090.n4.nabble.com/file/n4664748/829718907.png> i have only 4 workers and dont wanto to increase them , because i think if i increased them i will have low bw utilization . =================================================== here is last of dmesg file log : > EXT4-fs (sda1): re-mounted. Opts: (null) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0860) > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 > iTCO_vendor_support: vendor-support=0 > dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) > perf_event_intel: PEBS enabled due to microcode update > microcode: CPU23 updated to revision 0x710, date = 2013-06-17 > microcode: CPU22 updated to revision 0x710, date = 2013-06-17 > microcode: CPU21 updated to revision 0x710, date = 2013-06-17 > microcode: CPU20 updated to revision 0x710, date = 2013-06-17 > microcode: CPU19 updated to revision 0x710, date = 2013-06-17 > microcode: CPU18 updated to revision 0x710, date = 2013-06-17 > microcode: CPU17 updated to revision 0x710, date = 2013-06-17 > microcode: CPU16 updated to revision 0x710, date = 2013-06-17 > microcode: CPU15 updated to revision 0x710, date = 2013-06-17 > microcode: CPU14 updated to revision 0x710, date = 2013-06-17 > microcode: CPU13 updated to revision 0x710, date = 2013-06-17 > microcode: CPU12 updated to revision 0x710, date = 2013-06-17 > microcode: CPU11 updated to revision 0x710, date = 2013-06-17 > microcode: CPU10 updated to revision 0x710, date = 2013-06-17 > microcode: CPU9 updated to revision 0x710, date = 2013-06-17 > microcode: CPU8 updated to revision 0x710, date = 2013-06-17 > microcode: CPU7 updated to revision 0x710, date = 2013-06-17 > microcode: CPU6 updated to revision 0x710, date = 2013-06-17 > microcode: CPU5 updated to revision 0x710, date = 2013-06-17 > microcode: CPU4 updated to revision 0x710, date = 2013-06-17 > microcode: CPU3 updated to revision 0x710, date = 2013-06-17 > microcode: CPU2 updated to revision 0x710, date = 2013-06-17 > microcode: CPU1 updated to revision 0x710, date = 2013-06-17 > microcode: CPU0 updated to revision 0x710, date = 2013-06-17 > microcode: Microcode Update Driver: v2.00 > < > tigran@xxxxxxxxxxxxxxxxxxxx > > > , Peter Oruba > microcode: CPU23 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU22 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU21 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU20 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU19 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU18 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU17 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU16 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x70b > microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x70b ======================================== [root@squid ~]# cat /etc/redhat-release CentOS release 6.5 (Final) [root@squid ~]# uname -a Linux squid.ps 3.7.5 #1 SMP Tue Feb 11 21:31:21 EET 2014 x86_64 x86_64 x86_64 GNU/Linux [root@squid ~]# ================================================================== [root@squid ~]# cat /etc/squid/squid.conf > ################################################################# > # Example rule allowing access from your local networks. > # Adapt to list your (internal) IP networks from where browsing > # should be allowed > acl localnet src 10.0.0.0/8 # RFC1918 possible internal network > acl localnet src 172.16.0.0/12 # RFC1918 possible internal network > acl localnet src 192.168.0.0/16 # RFC1918 possible internal network > acl localnet src fc00::/7 # RFC 4193 local private network range > acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) > machines > acl mysubnet src xxxxxxxxxxxxxxxxxxxxxxxxxxxx > acl eliezer src xxxxxxxxxxxxxxxxxxxx > acl localip src xxxxxxxxx > acl SSL_ports port 443 > acl Safe_ports port 80 # http > acl Safe_ports port 21 # ftp > acl Safe_ports port 443 # https > acl Safe_ports port 70 # gopher > acl Safe_ports port 210 # wais > acl Safe_ports port 1025-65535 # unregistered ports > acl Safe_ports port 280 # http-mgmt > acl Safe_ports port 488 # gss-http > acl Safe_ports port 591 # filemaker > acl Safe_ports port 777 # multiling http > acl CONNECT method CONNECT > ###################################################### > # Recommended minimum Access Permission configuration: > # Deny requests to certain unsafe ports > ########################################################## > ############################################################## > http_access deny !Safe_ports > http_access allow localnet > # Deny CONNECT to other than secure SSL ports > http_access deny CONNECT !SSL_ports > ####################################################### > ###########SMP oPTIONS##################### > dns_v4_first on > workers 4 > ######################################################## > #cpu_affinity_map process_numbers=1,2,3,4 cores=2,4,6,8 > #http_port 127.0.0.1:400${process_number} > #http_port ::1:66000 > ######################################### > visible_hostname xxxxxxxxxxxxxxxx > #################################################### > ####Filterring############## > acl blockkeywords dstdomain "/etc/squid/xxxxxxxxxxx" > http_access deny blockkeywords > ################################################# > cache_log /var/log/squid/cache.log > access_log /var/log/squid/access.log > ############################################### > http_port ffffff:xxxx > http_port dddddd:eeeeeeeeeee tproxy > ############################################################################ > http_access allow mysubnet > ############################################################################################ > cache_mgr xxxxxxxxxxxxxxxxxxxxx > cachemgr_passwd xxxxxxxxxxxxxxxxxxxx all > ####################################################### > # add user authentication and similar options here > http_access allow manager localhost > http_access allow manager localip > http_access allow manager mysubnet > http_access allow mysubnet manager > http_access deny manager > ####################################################################### > cache_mem 3000 MB > maximum_object_size_in_memory 10 MB > ######################################################### > quick_abort_pct 95 > fqdncache_size 65535 > ipcache_size 65535 > ########################################################### > ipcache_low 98 > ipcache_high 99 > ##################################################### > ########### WCCP2 Config############# > wccp2_router x.x.x.x > wccp_version 1 > wccp2_forwarding_method 2 > wccp2_return_method 2 > wccp2_assignment_method 2 > wccp2_service dynamic 60 > wccp2_service_info 60 protocol=tcp flags=src_ip_hash priority=250 ports=80 > wccp2_service dynamic 70 > wccp2_service_info 70 protocol=tcp flags=dst_ip_hash,ports_source > priority=250 ports=80 > ###################################################### > cache_effective_user squid > cache_effective_group squid > ####################################################### > memory_replacement_policy heap GDSF > cache_replacement_policy heap LFUDA > ##################################################### > dns_nameservers x.x.x.x 8.8.8.8 > ####################################################### > http_access deny all > ############################## > refresh_pattern ^ftp: 1440 20% 10080 > refresh_pattern ^gopher: 1440 0% 1440 > refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 > refresh_pattern . 0 20% 4320 > #################################################### > memory_pools off > pconn_timeout 2 minutes > persistent_request_timeout 1 minute > ##################### > max_filedesc 131072 *any help ???? any suggestion ????* ----- Dr.x -- View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/Unbalaned-Cpu-cores-with-squid-3-4-3-with-centos-6-4-64-bit-tp4664748.html Sent from the Squid - Users mailing list archive at Nabble.com.
