Can somebody reproduce the problem? Or I'm the only one who have it? Best, Niki P.S. Made some additional testing with diskd storage - no problems detected. IPC seems to work as expected in diskd mode. On Wed, Jan 29, 2014 at 12:26 PM, Nikolai Gorchilov <niki@xxxxxxxx> wrote: > I just made a new discovery - the problem seemingly disappears when > running Squid with -N, thus removing the disker process out of the > equation. > > Could it be a worker-disker IPC related issue, instead of rock store > specific problem? > > Best, > Niki > > On Wed, Jan 29, 2014 at 12:00 PM, Nikolai Gorchilov <niki@xxxxxxxx> wrote: >> Dear Amos >> >> On Wed, Jan 29, 2014 at 5:18 AM, Amos Jeffries <squid3@xxxxxxxxxxxxx> wrote: >>>> >>>> The simple steps to reproduce: >>>> >>>> 1. Empty store dir and recreate swap with -z >>> >>> Did you leave sufficient time after doing this to ensure that the -z >>> operation was completed successfully and all the "squid -z" spawned >>> processes stopped? >> >> Yes. >> >>>> 2. Start Squid with the above config >>>> 3. Open a new private browser session (or clear browser cache) and >>>> request www.w3.org. Most of the 35+ requested items will get cached. >>>> 4. Once the page loads fully, request full reload Ctrl-Shift-R/Cmd-Shift-R >>> >>> Step 4 operation is blocked by the "reload_into_ims on" config directive >>> which turns these force-reload (Cache-Control:no-cache) requests into >>> If-Modified-Since (IMS) requests. >>> >>> Under correct protocol operation they should be TCP_MISS responses. >> >> Exactly. This problem exists only when delivering TCP_HITs. >> TCP_REFRESH_UNMODIFIED for instance works fine. >> >> As mentioned in conf comments reload_into_ims is used only to make the >> problem reproduction easier - having multiple TCP_HITs in short period >> of time somehow trigger it. >> >> Same scenario works perfectly fine when using aufs. >> >>>>> During this (and every next) reload few (1-3-5) random requests out of >>>> all 35+ objects will enter into this strange state, until the user >>>> aborts the connection. >>>> >>>> Access.log excerpts: >>>> rock: http://pastebin.com/QWTgqRTD >>>> aufs: http://pastebin.com/0WGdHPP9 >>>> >>>> Pay attention to '===[]===' marks in the logs, marking user's actions. >>>> >>>> Please help! Can you reproduce the problem or it's somehow related to >>>> my environment? >>> >>> >>> I note that you are only waiting 5-10 seconds between teh refresh and >>> escape. While this may be long enough, does the trace show any >>> difference if you leave it for a much longer time such as 30 or 60 seconds? >> >> I have seen connections in that state waiting for hours (say 1 night). >> Just did 30 minutes test: >> >> 1390989136.532 1910610 172.16.101.252 TCP_HIT_ABORTED/000 0 GET >> http://www.w3.org/2008/site/css/minimum - HIER_NONE/- - >> >> Checked active_connections for this same connection just before >> hitting ESC. Here's what Squid reports: >> >> Connection: 0x28e8be8 >> FD 22, read 322, wrote 0 >> FD desc: Reading next request >> in: buf 0x28eb9b0, offset 0, size 4096 >> remote: 172.16.101.252:58477 >> local: 192.168.1.10:3128 >> nrequests: 1 >> uri http://www.w3.org/2008/site/css/minimum >> logType TCP_HIT >> out.offset 0, out.size 0 >> req_sz 322 >> entry 0x2935d50/DC7BF6E1F61DA763BBCBD0043D4281A4 >> start 1390987225.923229 (1886.649296 seconds ago) >> username - >> >> Hope this helps! >> >> Best, >> Niki
