Thanks for highlighting this. I have the same problem on FreeBSD 9.1
with same version of Squid, compiled from source. A config file that
works with 3.3.8 does not work with 3.4.0.1 because of the refresh
patterns. Unfortunately, it seems my post about that did not get the
attention of Amos, Eliezer,etc.
On 1 August 2013 00:46, Tyler Sweet <tyler@xxxxxxxxxx> wrote:
> Hello,
>
> I'm having an odd issue with Squid 3.4 on FreeBSD 9.1, compiled from
> source. I'm not sure if this is a good place to ask for general
> support for 3.4 or not, but I figured I would try.
>
> When using the default configuration file included, the service fails
> to start with the error:
> FATAL: Bungled /usr/local/etc/squid/squid.conf line 75:
> refresh_pattern ^ftp: 1440 20% 10080
>
> As far as I can tell, it's correct. It's the default block of
> refresh_patterns, and they worked in 3.1, 3.2, and 3.3. Running with
> debug shows:
> ....snipped...
> 2013/07/31 16:42:17.618| Intercept.cc(422) ProbeForTproxy: Detect
> TPROXY support on port [::]:3129
> 2013/07/31 16:42:17.618| Intercept.cc(429) ProbeForTproxy: ...Probing
> for IPv6 TPROXY support.
> 2013/07/31 16:42:17.618| Intercept.cc(461) ProbeForTproxy: ...Probing
> for IPv4 TPROXY support.
> 2013/07/31 16:42:17.618| Intercept.cc(472) ProbeForTproxy: IPv4 TPROXY
> support detected. Using.
> 2013/07/31 16:42:17.618| tools.cc(636) leave_suid: leave_suid: PID 4334 called
> 2013/07/31 16:42:17.618| tools.cc(658) leave_suid: leave_suid: PID
> 4334 giving up root, becoming 'squid'
> 2013/07/31 16:42:17.619| cbdata.cc(419) cbdataInternalLock:
> cbdataLock: 0x8034a4758=1
> 2013/07/31 16:42:17.619| cache_cf.cc(556) parseOneConfigFile:
> Processing: coredump_dir /var/spool/
> 2013/07/31 16:42:17.619| cache_cf.cc(556) parseOneConfigFile:
> Processing: refresh_pattern ^ftp: 1440 20%
> 10080
> 2013/07/31 16:42:17.619| ERROR: A percentage value is missing.
> 2013/07/31 16:42:17.619| tools.cc(636) leave_suid: leave_suid: PID 4334 called
> 2013/07/31 16:42:17.619| tools.cc(658) leave_suid: leave_suid: PID
> 4334 giving up root, becoming 'squid'
> FATAL: Bungled /usr/local/etc/squid/squid.conf line 75:
> refresh_pattern ^ftp: 1440 20% 10080
> Squid Cache (Version 3.4.0.1): Terminated abnormally.
> CPU Usage: 0.012 seconds = 0.012 user + 0.000 sys
> ....snipped....
>
> I'm not sure why this is happening. I tried digging into the source a
> bit, and came to where the error is coming from:
> /*
> * This function is similar as GetInteger() but the token might contain
> * the percentage symbol (%) and we check whether the value is in the range
> * of [0, 100]
> * So, we accept two types of input: 1. XX% or 2. XX , 0<=XX<=100
> */
> int
> GetPercentage(void)
> {
> int p;
> char *token = strtok(NULL, w_space);
>
> if (!token) {
> debugs(0, DBG_PARSE_NOTE(DBG_IMPORTANT), "ERROR: A percentage
> value is missing.");
> self_destruct();
> }
>
> //if there is a % in the end of the digits, we remove it and go on.
> char* end = &token[strlen(token)-1];
> if (*end == '%') {
> *end = '\0';
> }
>
> p = xatoi(token);
>
> if (p < 0 || p > 100) {
> debugs(0, DBG_PARSE_NOTE(DBG_IMPORTANT), "ERROR: The value '"
> << token << "' is out of range. A percentage should be within [0,
> 100].");
> self_destruct();
> }
>
> return p;
> }
>
>
> But, with little (and closer to none at all) knowledge of C, I don't
> know how to debug it. Does anyone have any ideas? Has refresh_patterns
> been changed in 3.4 to a new syntax?
>
> My compile options are:
> Squid Cache: Version 3.4.0.1
> configure options: '--with-default-user=squid'
> '--bindir=/usr/local/sbin' '--sbindir=/usr/local/sbin'
> '--datadir=/usr/local/etc/squid'
> '--libexecdir=/usr/local/libexec/squid' '--localstatedir=/var'
> '--sysconfdir=/usr/local/etc/squid' '--with-logdir=/var/log/squid'
> '--with-pidfile=/var/run/squid/squid.pid'
> '--with-swapdir=/var/squid/cache/squid' '--enable-auth'
> '--enable-build-info' '--enable-loadable-modules'
> '--enable-removal-policies=lru heap' '--disable-epoll'
> '--disable-linux-netfilter' '--disable-translation'
> '--enable-auth-basic=DB MSNT MSNT-multi-domain NCSA PAM POP3 RADIUS
> fake getpwnam NIS' '--enable-auth-digest=file'
> '--enable-external-acl-helpers=file_userip time_quota unix_group'
> '--enable-auth-negotiate=kerberos wrapper' '--enable-auth-ntlm=fake
> smb_lm' '--enable-storeio=diskd rock ufs aufs' '--enable-disk-io=AIO
> Blocking DiskDaemon IpcIo Mmapped DiskThreads'
> '--enable-log-daemon-helpers=file' '--enable-url-rewrite-helpers=fake'
> '--disable-internal-dns' '--enable-htcp' '--disable-forw-via-db'
> '--enable-cache-digests' '--enable-wccp' '--enable-wccpv2'
> '--enable-eui' '--enable-ipfw-transparent' '--enable-pf-transparent'
> '--disable-ipf-transparent' '--disable-follow-x-forwarded-for'
> '--disable-ecap' '--disable-icap-client' '--disable-esi'
> '--enable-kqueue' '--with-large-files' '--prefix=/usr/local'
> '--mandir=/usr/local/man' '--infodir=/usr/local/info/'
> '--build=amd64-portbld-freebsd9.1'
> 'build_alias=amd64-portbld-freebsd9.1' 'CC=cc' 'CFLAGS=-O2 -pipe
> -fno-strict-aliasing' 'LDFLAGS= -pthread' 'CPPFLAGS=' 'CXX=c++'
> 'CXXFLAGS=-O2 -pipe -fno-strict-aliasing' 'CPP=cpp'
> '--enable-ltdl-convenience'
>
>
> Sorry if there was any bad etiquette, I'm not used to mailing lists.
> Let me know if I should do something different :)
> Thanks for any help!
> -Sweet
--
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
"I can't hear you -- I'm using the scrambler."
