Search squid archive

Re: what is best method to connect two squid servers on the same router?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



here is some verification from router , :
Gateway7600#sh ip wccp capabilities 
WCCP Platform Capability Settings

Capability                          Setting
            
Supported forwarding methods        GRE & L2            
Supported return methods            GRE & L2            
Supported assignment methods        Hash & Mask         
Accelerated forwarding methods      L2                  
Accelerated return methods          GRE & L2            
Accelerated assignment methods      Mask                
Accelerated Mode CLI                CLI Enabled         
Check Outbound ACL CLI              CLI Enabled         
Check All Services CLI              CLI Enabled         
Closed Service Suport               Unsupported         
VRF Support                         Supported           

Gateway7600#sh ip wcc
Gateway7600#sh ip wccp 
Global WCCP information:
    Router information:
        Router Identifier:                   192.168.100.100
        Protocol Version:                    2.0

    Service Identifier: 80
        Number of Service Group Clients:     1
        Number of Service Group Routers:     1
        Total Packets Redirected:            486448036
          Process:                           143
          CEF:                               486447893
        Service mode:                        Open
        Service Access-list:                 -none-
        Total Packets Dropped Closed:        0
        Redirect access-list:                CACHE88
        Total Packets Denied Redirect:       1611
        Total Packets Unassigned:            4037586
        Group access-list:                   -none-
        Total Messages Denied to Group:      0
        Total Authentication failures:       0
        Total GRE Bypassed Packets Received: 0
          Process:                           0
          CEF:                               0

    Service Identifier: 90
        Number of Service Group Clients:     1
        Number of Service Group Routers:     1
        Total Packets Redirected:            451437390
          Process:                           2014
          CEF:                               451435376
        Service mode:                        Open
        Service Access-list:                 -none-
        Total Packets Dropped Closed:        0
        Redirect access-list:                CACHE99
        Total Packets Denied Redirect:       96392
        Total Packets Unassigned:            5963594
        Group access-list:                   -none-
        Total Messages Denied to Group:      0
        Total Authentication failures:       0
        Total GRE Bypassed Packets Received: 0
          Process:                           0
          CEF:                               0

Gateway7600#
Gateway7600#sh ip wcc
Gateway7600#sh ip wccp de
Gateway7600#sh ip wccp su
Gateway7600#sh ip wccp summary 
WCCP version 2 enabled, 2 services

Warning: 2 service(s) referenced in interface config but not configured!

Service     Clients   Routers   Assign      Redirect   Bypass     
-------     -------   -------   ------      --------   ------     
Default routing table (Router Id: 192.168.100.100):
60 referenced but not configured
70 referenced but not configured
80          1         1         HASH        L2         L2         
90          1         1         HASH        L2         L2         

Gateway7600#



regards



--
View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/what-is-best-method-to-connect-two-squid-servers-on-the-same-router-tp4659922p4660148.html
Sent from the Squid - Users mailing list archive at Nabble.com.




[Index of Archives]     [Linux Audio Users]     [Samba]     [Big List of Linux Books]     [Linux USB]     [Yosemite News]

  Powered by Linux