Try to start from scratch what you are doing what are your settings?
If you have access denied you should look at the access.log.
What do you have there?
I dont think it's squid issue but another thing on the way but we cannot
even try helping you with the basic logs needed.
Regards,
Eliezer
On 12/20/2012 4:44 PM, Ali Jawad wrote:
Hi
I did miss to point out an important factor, the server is a remote
transparent proxy, in other words
my pc "uses a custom dns to point certain sites to proxy server" --
Internet Gateway ---- Transparent proxy with public IP and redirect
port 80 to proxy
Regards
On Thu, Dec 20, 2012 at 11:05 AM, Ali Jawad <alijawad1@xxxxxxxxx> wrote:
Hi
I do intercept traffic using iptables, problem is same config works
for squid 3.1.2, I did remove all access rules and ended up with the
config below but I still get an access denied error.
always_direct allow all
ssl_bump allow all
sslproxy_cert_error allow all
http_port 0.0.0.0:80 transparent
http_port 0.0.0.0:8080 transparent
http_port 0.0.0.0:3128
#http_port 127.0.0.1:3080 intercept
#https_port 0.0.0.0:443 transparent intercept
cert=/etc/squid/proxy.example.com.cert
key=/etc/squid/proxy.example.com.key
#https_port 0.0.0.0:443 transparent ssl-bump
cert=/etc/squid/proxy.example.com.cert
key=/etc/squid/proxy.example.com.key
http_access allow all
coredump_dir /usr/local/squid/var/cache/squid
# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
#debug_options ALL,3
Regards
On Wed, Dec 19, 2012 at 9:45 PM, Eliezer Croitoru <eliezer@xxxxxxxxxxxx> wrote:
egards,
Eliezer
--
Eliezer Croitoru
https://www1.ngtech.co.il
sip:ngtech@xxxxxxxxxxxx
IT consulting for Nonprofit organizations
eliezer <at> ngtech.co.il
