Can you share information on ALL addresses? eth0? eth0:1? eth1? Don't be shy, share the details. Also, Eliezer has previously asked whether you wanted to Load Balance or just specify an outbound routing direction. Do you have an answer to that question? Thanks, Nick -- On 27 Nov 2012, at 15:53, Bruno de Oliveira Bastos <kidboy@xxxxxxxxxxxxxx> wrote: > Yes, my adsl is 192.168.1.1 and my network lan is 192.168.1.2. > > 2012/11/27 Nick Fennell <nick@xxxxxxxx>: >> What is your default route address? >> >> Are your LAN and ADSL links sharing the same subnet? >> >> Can you provide more information on interface names and subnet addressing? >> >> Thanks. >> >> Nick >> -- >> On 27 Nov 2012, at 10:52, Bruno de Oliveira Bastos <kidboy@xxxxxxxxxxxxxx> wrote: >> >>> Hi, i am using the squid 3.1.10, and i have 3 links with internet for >>> outgoing. With the directive tcp_outgoing in interfaces with IP WAN, >>> its work fine, but i have the third link with ADSL, with IP >>> 192.168.1.2 in my interface, but every time i put IP 192.168.1.2 in >>> tcp_outgoing_address, the squid goes to interface of route default, >>> with WAN IP, and if i remove squid proxy in workstations, these >>> machines outgoing with IP of ADSL, only in squid its not work. Someone >>> can help me with this ? >>
