On Thu, 2012-08-30 at 00:14 -0700, Mustafa Raji wrote: > hi i have a problem with zph configuration in squid 3.1.11 in the squid > wiki i find the zph configuration directive is qos_flows and i want to > mark the local-hit packet to root this packets locally > > the configuration in squid.conf file is > > acl localnet 10.10.10.0/24 > tcp_outgoing_tos 0xFF localnet I think you want clientside_tos if you want to affect packets going to the local client. tcp_outgoing_tos is for packets going to the remote server. > qos_flows local-hit=0xFF > > applying these configuration directive and dump the packets using > tcpdump shows that, this configuration does not works for me some > output of tcpdump >From http://www.squid-cache.org/Doc/config/tcp_outgoing_tos/ "Often only multiples of 4 is usable as the two rightmost bits have been redefined for use by ECN (RFC 3168 section 23.1)" > i am using squid 3.1.11 with --enable-zph-qos, squid works in the > intercept mode and the os is debian squeeze You may want to consider upgrading to the 3.2 branch (although I appreciate that this is not a Debian stable package). A lot of improvements have been made to the qos_flows code, and there is also the option to use netfilter marks which you may find more flexible. Andy