Here is this morning's attempt at starting squid...first cache.log and then messages. This is the host where squid host that was working for few weeks, and I think a "yum update" added something into the mix. I am not so sure this is a IPv6 issue, actually. Any advice appreciated. My debug setting: debug_options 28,9 # cat cache.log 2012/05/21 12:18:25.286| ACL::~ACL: ' 2012/05/21 12:18:25.286| ACL::~ACL: ' 2012/05/21 12:18:25.286| ACL::~ACL: ' 2012/05/21 12:18:25.286| ACL::~ACL: ' 2012/05/21 12:18:25 kid1| Starting Squid Cache version 3.2.0.17 for x86_64-unknown-linux-gnu... 2012/05/21 12:18:26 kid1| Address.cc(958) GetSockAddr: Ip::Address::GetSockAddr : Cannot convert non-IPv4 to IPv4. from [::] 2012/05/21 12:18:29 kid1| Starting Squid Cache version 3.2.0.17 for x86_64-unknown-linux-gnu... 2012/05/21 12:18:30 kid1| Address.cc(958) GetSockAddr: Ip::Address::GetSockAddr : Cannot convert non-IPv4 to IPv4. from [::] 2012/05/21 12:18:33 kid1| Starting Squid Cache version 3.2.0.17 for x86_64-unknown-linux-gnu... 2012/05/21 12:18:34 kid1| Address.cc(958) GetSockAddr: Ip::Address::GetSockAddr : Cannot convert non-IPv4 to IPv4. from [::] 2012/05/21 12:18:37 kid1| Starting Squid Cache version 3.2.0.17 for x86_64-unknown-linux-gnu... 2012/05/21 12:18:38 kid1| Address.cc(958) GetSockAddr: Ip::Address::GetSockAddr : Cannot convert non-IPv4 to IPv4. from [::] 2012/05/21 12:18:41 kid1| Starting Squid Cache version 3.2.0.17 for x86_64-unknown-linux-gnu... 2012/05/21 12:18:42 kid1| Address.cc(958) GetSockAddr: Ip::Address::GetSockAddr : Cannot convert non-IPv4 to IPv4. from [::] 2012/05/21 12:18:42.335| ACL::~ACL: ' 2012/05/21 12:18:42.335| ACL::~ACL: ' 2012/05/21 12:18:42.335| ACL::~ACL: ' 2012/05/21 12:18:42.335| ACL::~ACL: ' 2012/05/21 12:18:42.335| ACL::~ACL: ' 2012/05/21 12:18:42.335| ACL::~ACL: ' # grep squid messages May 21 12:18:25 splprx01 squid[17095]: Squid Parent: will start 1 kids May 21 12:18:25 splprx01 squid[17095]: Squid Parent: (squid-1) process 17098 started May 21 12:18:25 splprx01 squid[17098]: Starting Squid Cache version 3.2.0.17 for x86_64-unknown-linux-gnu... May 21 12:18:26 splprx01 squid[17098]: Address.cc(958) GetSockAddr: Ip::Address::GetSockAddr : Cannot convert non-IPv4 to IPv4. from [::] May 21 12:18:26 splprx01 squid[17095]: Squid Parent: (squid-1) process 17098 exited due to signal 6 with status 0 May 21 12:18:29 splprx01 squid[17095]: Squid Parent: (squid-1) process 17101 started May 21 12:18:29 splprx01 squid[17101]: Starting Squid Cache version 3.2.0.17 for x86_64-unknown-linux-gnu... May 21 12:18:30 splprx01 squid[17101]: Address.cc(958) GetSockAddr: Ip::Address::GetSockAddr : Cannot convert non-IPv4 to IPv4. from [::] May 21 12:18:30 splprx01 squid[17095]: Squid Parent: (squid-1) process 17101 exited due to signal 6 with status 0 May 21 12:18:33 splprx01 squid[17095]: Squid Parent: (squid-1) process 17104 started May 21 12:18:33 splprx01 squid[17104]: Starting Squid Cache version 3.2.0.17 for x86_64-unknown-linux-gnu... May 21 12:18:34 splprx01 squid[17104]: Address.cc(958) GetSockAddr: Ip::Address::GetSockAddr : Cannot convert non-IPv4 to IPv4. from [::] May 21 12:18:34 splprx01 squid[17095]: Squid Parent: (squid-1) process 17104 exited due to signal 6 with status 0 May 21 12:18:37 splprx01 squid[17095]: Squid Parent: (squid-1) process 17107 started May 21 12:18:37 splprx01 squid[17107]: Starting Squid Cache version 3.2.0.17 for x86_64-unknown-linux-gnu... May 21 12:18:38 splprx01 squid[17107]: Address.cc(958) GetSockAddr: Ip::Address::GetSockAddr : Cannot convert non-IPv4 to IPv4. from [::] May 21 12:18:38 splprx01 squid[17095]: Squid Parent: (squid-1) process 17107 exited due to signal 6 with status 0 May 21 12:18:41 splprx01 squid[17095]: Squid Parent: (squid-1) process 17112 started May 21 12:18:41 splprx01 squid[17112]: Starting Squid Cache version 3.2.0.17 for x86_64-unknown-linux-gnu... May 21 12:18:42 splprx01 squid[17112]: Address.cc(958) GetSockAddr: Ip::Address::GetSockAddr : Cannot convert non-IPv4 to IPv4. from [::] May 21 12:18:42 splprx01 squid[17095]: Squid Parent: (squid-1) process 17112 exited due to signal 6 with status 0 May 21 12:18:42 splprx01 squid[17095]: Squid Parent: (squid-1) process 17112 will not be restarted due to repeated, frequent failures May 21 12:18:42 splprx01 squid[17095]: Exiting due to repeated, frequent failures -----Original Message----- From: Amos Jeffries [mailto:squid3@xxxxxxxxxxxxx] Sent: Saturday, May 19, 2012 7:12 PM To: squid-users@xxxxxxxxxxxxxxx Subject: Re: IPv6 error prevents Squid start On 20/05/2012 2:34 a.m., Zill, Gregory (OMA-GIS) wrote: > Added debug_options 28,9 to squid.conf > > May 19 11:20:08 splprx01 ntpd[1593]: synchronized to 10.226.0.19, > stratum 3 May 19 11:20:08 splprx01 ntpd[1593]: time reset -0.311298 s > May 19 11:20:08 splprx01 ntpd[1593]: kernel time sync status change > 2001 May 19 11:29:01 splprx01 ntpd[1593]: synchronized to 10.226.0.19, > stratum 3 May 19 11:32:14 splprx01 squid[2018]: Squid Parent: will > start 1 kids May 19 11:32:14 splprx01 squid[2018]: Squid Parent: > (squid-1) process 2021 started May 19 11:32:14 splprx01 squid[2021]: Starting Squid Cache version 3.2.0.17 for x86_64-unknown-linux-gnu... > May 19 11:32:15 splprx01 squid[2021]: Address.cc(958) GetSockAddr: > Ip::Address::GetSockAddr : Cannot convert non-IPv4 to IPv4. from [::] > May 19 11:32:15 splprx01 squid[2018]: Squid Parent: (squid-1) process > 2021 exited due to signal 6 with status 0 This is the kernel / syslog trace of what the kernel sees happening. You need to look in squid cache.log for the Squid debug messages. Amos This message contains information which may be confidential and privileged. Unless you are the intended recipient (or authorized to receive this message for the intended recipient), you may not use, copy, disseminate or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail, and delete the message. Thank you very much.
