I am still a beginner, I googled some site and found this configuration initially it was this # # Recommended minimum configuration: # acl manager proto cache_object acl server src 192.168.1.10 acl localhost src 192.168.1.0/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost server http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost server # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 3128 # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/spool/squid 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 visible_hostname reactmedia.com debug_options ALL,1 33,2 28,9 tcp_outgoing_address 122.166.1.184 Thanks & Regards Vijay -----Original Message----- From: Edmonds Namasenda [mailto:namasenda@xxxxxxxxx] Sent: Monday, March 19, 2012 10:33 PM To: Vijay S; squid-users@xxxxxxxxxxxxxxx Subject: Re: whitelisted IP problem Vijay, Just a quick look has shown me you did not specify your network and there are a few typo errors. Re-adjust, test, and fill us in some more. I.P.N Edmonds Systems | Networks | ICTs UgM: +256 71 227 3374 | TzM: +255 68 422 1561 # 22249, Kampala Uganda. -----Original Message----- From: Vijay S <vijay@xxxxxxxxxxxxxx> Date: Mon, 19 Mar 2012 22:28:03 To: <squid-users@xxxxxxxxxxxxxxx> Subject: whitelisted IP problem Hi I have a my server box hosting apache and squid on centos machine. When I send my request for clients feeds it works as they have whitelisted my IP address, and when I make the call via squid its give me invalid IP. I checked the access log for more information and found out instead of sending my IP address its sending the localhost IP address (127.0.0.1). I googled a little and found that using tcp_outgoing_address directive I can control the outgoing IP address and to my bad luck this didn't work My configuration file is as follows acl all src all acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/32 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access deny all icp_access allow all http_port 3128 visible_hostname loclahost debug_options ALL,1 33,2 28,9 tcp_outgoing_address 122.166.1.184 Can somebody help me with configuration for the my servers. It will be of great help. Thanks & Regards Vijay
