-------- Original-Nachricht -------- > Datum: Sat, 10 Mar 2012 01:43:23 +1300 > Von: Amos Jeffries <squid3@xxxxxxxxxxxxx> > An: squid-users@xxxxxxxxxxxxxxx > Betreff: Re: problem compiling squid-3.2.0.16-20120308-r11536 on OS X 10.4.11 > On 9/03/2012 7:56 p.m., YJZ wrote: > > Back on OS X 10.4.11, squid-3.2.0.16-20120308-r11536 fails to compile > with either gcc 4.0.1 or 4.2.1, but squid-3.2.0.16 from March 6th compiles > fine with the same ./configure flags: > > Nothing changed in the Squid code between those two bundles. Just one > include for defining symbols was added to a socket I/O module which you > are not even building. > > Amos > > Not sure what to make of it: I was compiling squid with "make -j 2" for the first times yesterday, for both squid-3.2.0.16 and squid-3.2.0.16-20120308-r11536, when it succeeded with the former and failed with the latter. Today, the first "make -j 2" with a fresh squid-3.2.0.16-20120308-r11536 failed at the same spot. A "make" without "make clean" failed immediately with the same errors. Starting with another fresh squid-3.2.0.16-20120308-r11536, and removing that #include <StatCounters.h>, it compiled fine with "make". Restoring #include <StatCounters.h>, it compiled fine again after "make clean" and "make". Starting with a third fresh copy of squid-3.2.0.16-20120308-r11536, it finished fine with "make -j 2". These results don't make show any pattern as to why contributed to the initial failures. -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
