On 1/26/12, Amos Jeffries <squid3@xxxxxxxxxxxxx> wrote: > On 27/01/2012 2:46 p.m., Carlos Manuel Trepeu Pupo wrote: >> I have squid 3.0 STABLE1 giving service to 340 clients. I need to >> limit the maxconn to 20, but I need to know if I put 192.168.10.0/24 >> will limit each IP to 20 or the entire /24 to 20. In case that the >> rule it's for the entire /24, so I need to create the rule for each IP >> ? > > Put "192.168.10.0/24" where exactly? Sorry for the explication !! > In the maxconn ACL? Wont work, maxconn takes a single value. > In a separate unrelated src ACL? notice how src != maxconn. And its > test result is equally independent when tested. src looks for an > individual IP (the packet src IP) in a set. > > Amos > # I have this: acl client src 10.10.10.0/24 acl client src 10.71.0.0/24 acl client src 10.1.0.0/24 acl max_conn maxconn 10 http_access deny client max_conn # The idea of above configuration is allow a maximum of 10 http connection from each IP from clients networks to access the proxy. I need to know if this work or this configuration allow just 10 http connection between all !!!
