Hi, You are using wrong "auth_param negotiate" options: > auth_param negotiate realm Internet-Access > auth_param negotiate credentialsttl 5 minute Regards Guido Serassio Acme Consulting S.r.l. Microsoft Gold Certified Partner VMware Professional Partner Via Lucia Savarino, 1 10098 - Rivoli (TO) - ITALY Tel. : +39.011.9530135 Fax. : +39.011.9781115 Email: guido.serassio@xxxxxxxxxxxxxxxxx WWW: http://www.acmeconsulting.it > -----Messaggio originale----- > Da: Lakshman Liyanage [mailto:one.lakshman@xxxxxxxxx] > Inviato: mercoledì 23 marzo 2011 7.36 > A: squid-users@xxxxxxxxxxxxxxx > Oggetto: Fwd: Re: Configuring SQUID in Windows to > authenticate with Active Directory > > ---------- Forwarded message ---------- > From: Lakshman Liyanage <one.lakshman@xxxxxxxxx> > Date: Wed, Mar 23, 2011 at 4:34 PM > Subject: Re: Re: Configuring SQUID in Windows to > authenticate with Active Directory > To: Markus Moeller <huaraz@xxxxxxxxxxxxxxxx>, squid-users@xxxxxxxxxxxxxxx > > > Thank You Marcus for reply. > > The reason I asked about squid_kerb_auth is that someone on the list > (Rafal Zawierta) mentioned that he/she got it to work in Windows > 2008R2 (AD). > > Anyway, I tried what you suggested. Now I do not get a logon window in > the browser for me to enter credentials - instead it throws me "Cache > Access Denied" message. > > As I mentioned earlier I am a newbie - so excuse me if I am missing > obvious. I have the following lines in my squid.conf: > > auth_param negotiate program c:/squid/libexec/mswin_negotiate_auth.exe > auth_param negotiate children 5 > auth_param negotiate realm Internet-Access > auth_param negotiate credentialsttl 5 minute > > acl password proxy_auth REQUIRED > http_access allow password > # http_accesss allow localhost > > What am I missing in my .conf? > > Many thanks > > Lakshman > On Wed, Mar 23, 2011 at 9:47 AM, Markus Moeller <huaraz@xxxxxxxxxxxxxxxx> > wrote: > > > > Look ay Amos's reply. Three is no squid_kerb_auth on Windows. You must > use mswin_negotiate_auth > > > > Markus > > > > "Liyanage, Lakshman" <lakshman.liyanage@xxxxxxxxxx> wrote in message > news:1997817097853D4CB2B2AD655359FD28051173BF65@xxxxxxxxxxxxxxxxxxxxxxxxxx > .. > >> > >> Hi All, > >> > >> Just hoping thise Windows guys will help me with my query below - > where/how would I find squid_kerb_auth helper for 2.7? > >> > >> Thanks > >> > >> Lakshman > >> > >> ________________________________________ > >> From: Liyanage, Lakshman > >> Sent: Wednesday, 16 March 2011 10:08 AM > >> To: squid-users@xxxxxxxxxxxxxxx > >> Subject: FW: Configuring SQUID in Windows to authenticate with Active > Directory > >> > >> Hello All, > >> > >> I am trying configure SQUID 2.7 in Windows 2008 R2 (Sometime ago, then > I had to postpone the project for a while) and I posted my cry for help > here - for which Rafal responded (see below). > >> > >> However, I can not see squid_kerb_auth helper in my SQUID > installation. Ho do I get this? > >> > >> Thanks and Regards > >> > >> L. > >> ------- > >> From: Rafal Zawierta [zawierta@xxxxxxxxx] > >> Sent: Saturday, 12 February 2011 8:10 PM > >> To: Liyanage, Lakshman > >> Subject: Re: Configuring SQUID in Windows to authenticate > with Active Directory > >> Hello, try squid_kerb_auth instead ldap. For me it works with AD > 2008R2. > >> Regards > >> R > >> > >> > >> ________________________________________ > >> From: Liyanage, Lakshman [lakshman.liyanage@xxxxxxxxxx] > >> Sent: Saturday, 12 February 2011 1:41 PM > >> To: squid-users@xxxxxxxxxxxxxxx > >> Subject: Configuring SQUID in Windows to authenticate > with Active Directory > >> > >> Hello All, > >> I am new to SQUID and hence require some help. > >> I have SQUID 2.7 Stable8 installed on a Windows Server 2008 R2. I am > now trying to configure it to use MS Active Directory. I have the > following lines in the .conf file: > >> ----- > >> auth_param basic program c:/squid/libexec/squid_ldap_auth -R -b "dc=ad- > mycompany,dc=domain,dc=com" -D "cn=admin,cn=Users,dc=ad- > mycompany,dc=domain,dc=com" -w "password" -f sAMAccountName=%s -h > myipnumber > >> auth_param basic children 5 > >> auth_param basic realm My_Company > >> auth_param basic credentialsttl 5 minute > >> ------ > >> When I try to start SQUID, Windows throws" Error 1067: The process > terminated unexpectedly" at me. I have a web server/service running on > port 80 and 443. > >> What am I missing here? > >> Many many thanks for your help > >> > >> Lakshman > > > >
