On Fri, 18 Mar 2011, david@xxxxxxx wrote:
On Fri, 18 Mar 2011, Amos Jeffries wrote:
On 18/03/11 10:05, david@xxxxxxx wrote:
ping, any comments on this?
excluding acl's, cache_peer* and *direct config entries (~500 lines
worth, all IP, servername, port# or url_regex based)
Tested with or without all those ACLs? They do make a difference to speed,
even the fast ACL tests.
I would expect them to, but my issue isn't with the overall speed, but rather
with the relative speed of the two versions when running the same ruleset. It
appears that 3.1 is significantly slower under these conditions than 3.0.
pid_filename /var/run/squid.pid
cache_dir null /tmp
client_db off
cache_access_log syslog squid
NP: Squid needs a syslog format spec. Same as you would use in the syslog
config. "syslog:daemon.1" or some such. And the directive name is now just
"access_log"
it is documented as the facility and severity being optional, and the
format spec is given 'squid'
There is about 30% CPU load increase as well as the raw speed drop. That
30% is IMO what you are measuring. When topping out the CPU it obviously
can't handle many more RPS.
* adding IPv6 support
- copying, checking version and text'ifying larger IPs a lot is SLOW.
- looking up DNS twice (AAAA and A) is relatively slower.
- failover when connecting via a network with broken IPv6 connectivity
results slower server connect times. any transit network blocking ICMPv6
breaks *your* IP failover.
3.1 was compiled without IPv6 support (I'll report all the config options in
the morning)
Ok, the config options for 3.0 and 3.1 are:
From dlang@xxxxxxxxxxxxxxxxxx Fri Mar 18 14:47:00 2011
Date: Fri, 18 Mar 2011 14:46:59 -0700 (PDT)
From: David Lang <dlang@xxxxxxxxxxxxxxxxxx>
To: david@xxxxxxx
Subject: squid config
It was created by Squid Web Proxy configure 3.0.STABLE12, which was
generated by GNU Autoconf 2.62. Invocation command line was
$ ./configure --prefix= --bindir=/usr/squid/bin --sbindir=/usr/squid/sbin
--libexecdir=/usr/squid/libexec --datadir=/usr/squid/share
--sysconfdir=/etc/squid --localstatedir=/usr/squid/var --mandir=/usr/squid/man
--disable-ident-lookups --enable-default-err-language=English
--enable-err-languages=English --disable-wccp --enable-kill-parent-hack
--enable-gnuregex --disable-loadable-modules --enable-ssl --disable-translation
--with-large-files --with-logdir=/var/log --enable-storeio=null
--enable-err-languages=en en-us
It was created by Squid Web Proxy configure 3.1.11, which was
generated by GNU Autoconf 2.68. Invocation command line was
$ ./configure --prefix= --bindir=/usr/squid/bin --sbindir=/usr/squid/sbin
--libexecdir=/usr/squid/libexec --datadir=/usr/squid/share
--sysconfdir=/etc/squid --localstatedir=/usr/squid/var --mandir=/usr/squid/man
--disable-ident-lookups --disable-wccp --enable-kill-parent-hack
--disable-loadable-modules --disable-ssl --disable-translation
--with-large-files --with-logdir=/var/log --disable-ipv6
--with-filedescriptors=32768
is there anything in here that hurts the performance and I should remove
(or anything I should have in here for best performance)
David Lang
