On Wed, 23 Feb 2011 14:55:25 -0800, M. Leong Lists wrote:
Hi,
I've 2 problems where squid is taking excessive time to service a
request.
My setup:
-Accelerator setup
-backends are on load balancer, squid is configured to connect to the
load balancer IP multiple times
-squid's configured to store the cache as long as possible.
-icp time is set to really high, otherwise some siblings doesn't
respond in time. Should this be lowered?
Think about that a bit:
* the sibling is taking a very long time to respond to a single ICP
packet.
What do you think the speed will be like to it when you send a whole
bunch of request and reply packets? better/same/worse?
So in the end do you think it is a better idea to ICP-timeout and mark
the peers as down/unusable fast and move on to the alternatives? or to
keep waiting?
Version:
Squid Cache: Version 2.7.STABLE9
configure options: '--prefix=/apps/squid'
'--enable-x-accelerator-vary' '--enable-linux-netfilter'
'--enable-cache-digests' '--enable-htcp' '--enable-snmp'
'--enable-referer-log' '--enable-useragent-log'
'--enable-delay-pools'
'--enable-icmp' '--enable-async-io=500' '--with-maxfd=10240'
'--enable-removal-policies=lru,heap'
'--enable-follow-x-forwarded-for'
'--enable-epoll' '--with-large-files'
Relevant config:
http_port 80 vhost defaultsite=cache.example.com
cache_mem 512 MB
cache_peer lb.example.com parent 80 0 round-robin no-query
originserver no-netdb-exchange no-digest name=lb_01
... <snip>
cache_peer lb.example.com parent 80 0 round-robin no-query
originserver no-netdb-exchange no-digest name=lb_10
So you are manually load-balancing the way connections are made to a
load balancer. WHY? what happens if you remove these duplicate peer
links?
NP: squid defaults to 10 connection attempts to each peer before it
gives up. So you have potentially a grand total of 100 TCP connections
made through the LB before the request fails.
Update the LB to only make connection attempts to working sources and
use it once by Squid. If it is already doing that smart logics, this
configuration setup is not of much use.
Or if the LB is not smart enough to do that kind of control it is of
less use than the built in load-balancing which Squid does. Discard it
and just use the round-robin selection directly to the peers behind the
LB. All the problems you have with end-to-end path discovery, connection
up/down status and persistence will disappear.
cache_peer cache01.example.com sibling 80 3130 proxy-only no-delay
allow-miss weight=1 no-netdb-exchange no-digest name=cache01
..<snip>
cache_peer cache08.example.com sibling 80 3130 proxy-only no-delay
allow-miss weight=1 no-netdb-exchange no-digest name=cache08
client_persistent_connections off
server_persistent_connections off
The above will be part of your lag problem. I know why you do it,
separating persistent connections and load balancing do not work
together very easily. Just saying that it will be a factor in the
problem.
Your Squid is reduced to a pure HTTP/1.0 level of efficiency with TCP
handshakes (possibly multiple) being done with every single client
request. All the HTTP/1.1 efficiency features to maintain long-term
persistent connections become a net loss of performance when connections
are forced closed all the time.
You should be able to re-enable persistent connections to clients
without problem. Given a reasonable timeout this will enable clients to
pipeline requests through the connection to Squid without leaving them
unused for long periods. It has no effect on the server facing
connections and their LB.
digest_generation off
icp_access allow all
icp_hit_stale on
icp_query_timeout 7000
maximum_icp_query_timeout 10000
nonhierarchical_direct off
url_rewrite_host_header off
offline_mode on
--------------------------------------
TIMEOUT_ROUNDROBIN_PARENT
All the TIMEOUT requests took at least 7000 ms, which is the value of
icp_query_timeout. Some requests took at over 30 sec to complete. I
crossed referenced those long requests against the backends and
notice
a big mismatch in the times. The backends are tomcat apps w/ Java
1.6. I extracted the times from the tomcat access log.
Squid Time Backend time:
7922 924
8422 1421
7488 487
12835 5833
25098 18096
34793 611
21806 14804
Time difference will be multiplied by the time Squid spends waiting for
a TCP handshake to occur on every connection. This is the full RTT of
three packets to cycle Squid->LB->tomcat and back again. Multiple that
by the 10-100 new connections your Squid is configured to make to the LB
before aborting with failure.
------------------------------------
High SIBLING_HIT response time:
The same problem occurs with sibling hits. The logged process time
on the sibling and the one requesting from the sibling vastly
differs:
Squid Time Time on Sibling's Log
4534 30
23994 12959
6661 40
---------------
Does anyone know of a reason why it would take so long for squid to
complete a request??
mike
Thats all I can think of off the top of my head, maybe more later.
Good luck.
Amos
