Hi, I'm trying to use squid as a transparent proxy. We're using ubuntu 10.04, 2.6.37 kernel, squid 3.1.10, and iptables 1.4.10. Server has 1 nic. Ports 3128 and ports 3129 are specified in squid.conf. When client browser proxy prefs are set to proxy server address, port 3128, traffic passes through squid and returns to client. When client browser proxy prefs are set to squid address, but using port 80, traffic shows up in access.log, but never returns to client. I'm not sure how to troubleshoot this. I followed the howtos for comping squid for ubuntu: http://wiki.squid-cache.org/SquidFaq/CompilingSquid#Debian.2C_Ubuntu and for setting it up as a transparent proxy: http://wiki.squid-cache.org/Features/Tproxy4 -------------- Here's the output of iptables test@proxy:~$ sudo iptables -t mangle -L Chain PREROUTING (policy ACCEPT) target prot opt source destination DIVERT tcp -- anywhere anywhere socket TPROXY tcp -- anywhere anywhere tcp dpt:www TPROXY redirect 0.0.0.0:3129 mark 0x1/0x1 Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination Chain DIVERT (1 references) target prot opt source destination MARK all -- anywhere anywhere MARK set 0x1 ACCEPT all -- anywhere anywhere ------------ Here's output from ip rule list: test@proxy:~$ ip rule list 0: from all lookup local 32765: from all fwmark 0x1 lookup 100 32766: from all lookup main 32767: from all lookup default ------------ Here's output from ip route list test@proxy:~$ ip route list 10.15.0.0/16 dev eth0 proto kernel scope link src 10.15.10.10 default via 10.15.0.1 dev eth0 metric 100 ----------- squid.conf # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network #acl localnet src 172.16.0.0/12 # RFC1918 possible internal network #acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 3128 http_port 3129 tproxy # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. cache_dir ufs /var/cache 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/cache # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 ----------- Thanks for any help you can provide. Marc -- View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/Client-timing-out-when-using-squid-as-tproxy-tp3243429p3243429.html Sent from the Squid - Users mailing list archive at Nabble.com.
