Amos Jeffries <squid3@xxxxxxxxxxxxx> writes: >In the wiki our example sets routing table 100 only on "lo". Does changing >that to "eth0" or "wccp0" make any difference? You can test by creating a >table 100 on all of them individually. The squid wiki example I am looking at does not have any routing tables. I'm using the one you gave me here http://wiki.squid-cache.org/Features/Wccp2#Squid_configuration_for_WCCP_version_2 Following the instructions for Cisco IOS 12.4(6) T2 router. I only have those 2 iptables rules set on my squid bos so I'm not sure how my iptables could be the problem. This is all of my active iptables printed out: fortress:/var/log/squid# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination fortress:/var/log/squid# iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywhere tcp dpt:www redir ports 3129 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination And just so I know this isn't the problem I will also give you my ifconifg: fortress:/var/log/squid# ifconfig eth0 Link encap:Ethernet HWaddr 00:03:47:ea:a4:b9 inet addr:192.168.0.21 Bcast:192.168.0.23 Mask:255.255.255.252 inet6 addr: fe80::203:47ff:feea:a4b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1776 errors:0 dropped:0 overruns:0 frame:0 TX packets:1703 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:426053 (416.0 KiB) TX bytes:431866 (421.7 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:734 errors:0 dropped:0 overruns:0 frame:0 TX packets:734 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:293220 (286.3 KiB) TX bytes:293220 (286.3 KiB) wccp0 Link encap:UNSPEC HWaddr C0-A8-00-15-00-00-65-74-00-00-00-00-00-00-00-00 inet addr:192.168.0.21 P-t-P:192.168.0.21 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MTU:1476 Metric:1 RX packets:285 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22823 (22.2 KiB) TX bytes:0 (0.0 B) Thanks for all the help thus far. I'm not very good when it comes to iptables so it could very well be that. Let me know if you see something or want me to try anything else. -Chris ___________________________ Chris Abel Systems and Network Administrator Wildwood Programs 2995 Curry Road Extension Schenectady, NY 12303 518-836-2341
