Leonardo Rodrigues wrote:
Em 28/08/2010 12:29, Andrei escreveu:
I'm setting up a transparent Squid box for 300 users. All requests
from the router are sent to the Squid box. Squid box has one NIC,
eth0. This box receives requests (from clients) and catches content
from the web using this one NIC on its one WAN port, eth0.
Question: would it improve performance of the Squid box if I was
receiving requests (from the clients) on eth0 and caching content on
eth1? In other words, is there a benefit of using two NIC's vs. one?
This is a public IP/WAN Squid box. Both eth0 and eth1 would have a WAN
(public IP) address.
I'm on a 12Mb line.
Your limitation is your 12Mb line .... any decent hardware can
handle that with no problem at all. ANY 100Mbit NIC, even onboard and
cheapers/generics one, can handle 12Mbit with no problem at all.
i really dont think adding another NIC will improve your
performance, given your 12Mbit WAN limitation.
Indeed.
Andrei escreveu:
Whether anything can be done by Squid depends on whether the clients
using Squid are on the outside of that 12Mb line or on some faster
connection between them and Squid.
For a faster internal connection and slower Internet connection you
can look towards raising the Hit Ratio' probably the byte hits
specifically. That will drop the load on the Internet line and make the
whole network appear faster to users. The holy grail for forward proxies
seems to be 50%, with reality coming in between 20% and 45% depending on
your clients and storage space.
Amos
--
Please be using
Current Stable Squid 2.7.STABLE9 or 3.1.7
Beta testers wanted for 3.2.0.1
