On 5/07/10 4:07 PM, "Notino" <truebassline@xxxxxxxxx> wrote: > > > Hello Everyone, > > I have setup squid on a VPS and successfully got the main IP to work with > nsa_auth and all is working 100% fine. My question is I am about to purchase > 50 IP addresses becuase I would like to add them on so private clients can > use. > > How would this be setup? I have looked around and heard I need to setup > tcp_outgoing_address; > So in this case would it be like so.... > > 80.90.90.01:port > 80.90.90.02:port > 80.90.90.03:port > And so on.... > > So if a client uses 80.90.90.01:port he/she will login with username and > passsword from nsa_auth and start browsing? Then the next client can use > 80.90.90.02:port and so on and so on? > > Thanks. > This is for squid 3 and may or may not be the best approach but it might help. You could probably setup an ACL that uses "myip" manual: http://www.visolve.com/squid/squid30/accesscontrols.php#myip acl myip1 myip 172.16.1.53/32 Then use the tcp_outgoing_address to use it http_port 80.90.90.03:port acl myip1 myip 80.90.90.03/32 tcp_outgoing_address 80.90.90.03 password myip1 http_access allow password myip1 Hope that helps. Each client would still need to point at a particular IP address that you have configured though. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the organisation. Finally, the recipient should check this email and any attachments for the presence of viruses. The organisation accepts no liability for any damage caused by any virus transmitted by this email.
