> From: Amos Jeffries [mailto:squid3@xxxxxxxxxxxxx] > Sent: Friday, May 14, 2010 1:32 AM > Simon Brereton wrote: > >> From: Henrik Nordström [mailto:henrik@xxxxxxxxxxxxxxxxxxx] > >> Sent: Wednesday, May 12, 2010 4:06 PM > >> > >> ons 2010-05-12 klockan 14:40 +0200 skrev Simon Brereton: > >> > >>> /etc/cron.daily/logrotate: > >>> 2010/05/05 07:35:20.152| aclParseUserList: parsing user list > >>> 2010/05/05 07:35:20.152| aclParseUserList: parsing user list > >> Looks like debug output. What is your debug_options directive set > to? > > > > 1245 # TAG: debug_options > > 1246 # Logging options are set as section,level where each source > file > > 1247 # is assigned a unique section. Lower levels result in less > > 1248 # output, Full debugging (level 9) can result in a very > large > > 1249 # log file, so be careful. The magic word "ALL" sets > debugging > > 1250 # levels for all sections. We recommend normally running > with > > 1251 # "ALL,1". > > 1252 # > > 1253 #Default: > > 1254 # debug_options ALL,1 > > 1255 debug_options all,2 > > > > I had it as ALL, but when I increaded it to ALL,9 to do some > debugging, nothing extra appeared in the logs. Google pulled up > someone with the same issue - or maybe I saw it go by on the list - > that writing it as all would fix that (but I'd already solved my > issue). > > > > Anacron emails me these lines whether it's ALL or all.. > > > > Simon > > > > > > Well, there you go. Debug level #2 is full of debugging traces. > > FWIW: > level 0 - critical failure messages. > level 1 - warnings and important notices > level 2 thru 9 - debug traces (section specific) > > This is why the recommended level is 1 and not 2 or higher. Amos I'll try that - but there are too things to note.. 1) I initially increased the debugging to see the auth failures - which I couldn't see - despite going to 9. In fact, I saw no difference between 1 and 2 so that's why I left it at that. 2) My logging options are to output to: 1128 access_log /var/log/squid3/access.log combined 1137 cache_log /var/log/squid3/cache.log I meant to send this out on Friday. Anacron doesn't seem to have sent me the notice since I made the change, but nonetheless, I'm curious as to why that would make a difference. My assumption is that no matter what I put the debugging level at, it should log to file, not to anacron. Cheers Simon
