senthilkumaar2021 wrote:
Hi
I am getting the following kernel panic error in kernel 2.6.30.5 while
running the squid t proxy in bridge mode
I have used the following iptables and ebtables rules
The panic occurs once in 10 -15 hrs
iptable and ebtables are
iptables -t mangle -N DIVERT
iptables -t mangle -A DIVERT -j MARK --set-mark 1
iptables -t mangle -A DIVERT -j ACCEPT
iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT
iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY
--tproxy-mark 0x1/0x1 --on-port 3129
ebtables -t broute -A BROUTING -i $CLIENT_IFACE -p ipv4 --ip-proto tcp
--ip-dport 80 -j redirect --redirect-target DROP
ebtables -t broute -A BROUTING -i $INET_IFACE -p ipv4 --ip-proto tcp
--ip-sport 80 -j redirect --redirect-target DROP
[<ffffffffa03933c2>] ? nf_nat_fn+0x138/0x14e [iptable_nat]
[<ffffffffa0393585>] ? nf_nat_in+0x2f/0x6e [iptable_nat]
[<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/0x2c4 [bridge]
[<ffffffffa027edfa>] br_nf_pre_routing_finish+0x50/0x2c4 [bridge]
[<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/0x2c4 [bridge]
[<ffffffff81339a50>] ? nf_hook_slow+0x68/0xc8
[<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/0x2c4 [bridge]
[<ffffffffa027f616>] br_nf_pre_routing+0x5a8/0x5c7 [bridge]
[<ffffffff813399ab>] nf_iterate+0x48/0x85
[<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
[<ffffffff81339a50>] nf_hook_slow+0x68/0xc8
[<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
[<ffffffffa027ac36>] br_handle_frame+0x1b1/0x1db [bridge]
[<ffffffff8131d54b>] netif_receive_skb+0x316/0x434
[<ffffffff8131dbfb>] napi_gro_receive+0x6e/0x83
[<ffffffffa0125bfe>] e1000_receive_skb+0x5c/0x65 [e1000e]
[<ffffffffa0125de8>] e1000_clean_rx_irq+0x1e1/0x28f [e1000e]
[<ffffffffa012730e>] e1000_clean+0x99/0x24a [e1000e]
[<ffffffff813bcfc5>] ? _spin_unlock_irqrestore+0x2c/0x43
[<ffffffff8131ba62>] net_rx_action+0xb8/0x1b4
[<ffffffff8104ed43>] __do_softirq+0x99/0x152
[<ffffffff8101284c>] call_softirq+0x1c/0x30
[<ffffffff81013a02>] do_softirq+0x52/0xb9
[<ffffffff8104e969>] irq_exit+0x53/0x8d
[<ffffffff81013d1a>] do_IRQ+0x135/0x157
[<ffffffff81011f93>] ret_from_intr+0x0/0x2e
<EOI> [<ffffffff81017e20>] ? mwait_idle+0x9e/0xc7
[<ffffffff81017e17>] ? mwait_idle+0x95/0xc7
[<ffffffff813bfd20>] ? atomic_notifier_call_chain+0x13/0x15
[<ffffffff810102f4>] ? enter_idle+0x27/0x29
Please help me in fixing the issue
Regards
senthil
[<ffffffff8101035e>] ? cpu_idle+0x68/0xb1
Please contact netfilter (http://www.netfilter.org/) who maintain the
code that is failing on you.
Amos
--
Please be using
Current Stable Squid 2.7.STABLE9 or 3.1.3
