Amos Jeffries 提到: > EIN SA wrote: >> Hello all, >> I am looking for a solution to forward some specific hostname to my 2nd >> lan card. >> My network inferface >> eth0 192.168.2.80 (connect Internet by a dynamic real IP) >> eth1 192.168.11.240 (connect Internet by a fixed real IP) >> >> All user clients PC point to 192.168.2.80 and the default will go out to >> eth0. But if the user trying go to ebrary.com, I wish the routing will >> go to the eth1. >> >> I have follow setting at my squid.conf but it does not work >> >> acl To_ebrary dstdomain .ebrary.com >> acl From_ebrary srcdomain .ebrary.com >> tcp_outgoing_address 192.168.11.240 To_ebrary >> tcp_outgoing_address 192.168.11.240 From_ebrary > > Almost. Try this: > > acl To_ebrary dstdomain .ebrary.com > tcp_outgoing_address 192.168.2.80 !To_ebrary > tcp_outgoing_address 192.168.11.240 To_ebrary > > Amos Hi Amos, Thank you for your help and I had changed the config as your suggestion. It still failed to route to 192.168.11.240. If type www.google.com at IE, the traffic will go to 192.168.2.80. But type www.ebrary.com, and the browser error message ERROR The requested URL could not be retrieved -------------------------------------------------------------------------------- The following error was encountered while trying to retrieve the URL: http://www.ebrary.com/ Connection to 140.234.254.11 failed. Follow is my network config and there is no iptable: /tmp# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.11.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.2.254 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 192.168.11.254 0.0.0.0 UG 0 0 0 eth1
