Please read the description of the coss type in cache_dir carefully. The 2.7 docs is found here http://www.squid-cache.org/Versions/v2/2.7/cfgman/cache_dir.html if you prefer reading them online. sön 2009-09-06 klockan 23:47 -0700 skrev pokeman: > > confuse to define coss parameter in squid.conf > > cache_dir coss /cache1 120000 max-size=524288 block-size=64 > > mount point= /cache1 > harddisk size 120 GB= 120000 > max-size object= ? > block-size = ? > > > Henrik Nordstrom-5 wrote: > > > > sön 2009-09-06 klockan 07:26 -0700 skrev pokeman: > >> Thanks henrik for your tip can you guide me what is the recomended > >> setting > >> for coss .2ndly currenly i am using aufs . after enabling coss what > >> heppen > >> with store cache object. coss required to use clean disk . > > > > You can use both coss & aufs on the same drive. To keep config clean > > just move the aufs data down to a folder below the root of that disk. > > > > cd /cache > > mkdir aufs > > mv ?? swap.state* aufs > > mkdir coss1 > > [repeat for as many coss stores you need] > > > > then reconfigure squid as appropriate. > > > > Regards > > Henrik > > > > > > >
