On Tue, Aug 18, 2009 at 10:10 AM, John Andrunas<john@xxxxxxxxxxxx> wrote: > I am having trouble getting squid 3.1 configured with icap and clamav. > I have it working with squid 3.0 but using the information on > http://wiki.squid-cache.org/Features/ICAP I just get ICAP > communication failed, nothing is getting logged in the icap logs so I > am fairly sure that it is a squid config issue. > > -- > John > my squid.conf has the following lines in it icap_enable on icap_preview_enable on icap_preview_size 128 icap_send_client_ip on icap_service service_avi_req reqmod_precache 0 icap://localhost:1344/srv_clamav adaptation_access service_avi_req allow all icap_service service_avi respmod_precache 1 icap://localhost:1344/srv_clamav adaptation_access service_avi_resp allow all nothing seems to get to icap (at least not logged), and I get the following error ICAP protocol error. The system returned: [No Error] This means that some aspect of the ICAP communication failed. Some possible problems are: * The ICAP server is not reachable. * An Illegal response was received from the ICAP server. If I remove teh adaptation_access lines I can browse, but nothing goes to icap. Any help? -- John