Thanks Amos, My C is extremely rusty so I appreciate your assistance!. Applied patch, results are below: 2009/08/16 22:51:27.471| command-line -X overrides: ALL,7 2009/08/16 22:51:27.471| signal: sig=31 func=sigusr2_handle: (0) No error 2009/08/16 22:51:27.471| CacheManager::registerAction: registering legacy mem 2009/08/16 22:51:27.471| CacheManager::findAction: looking for action mem 2009/08/16 22:51:27.487| Action not found. 2009/08/16 22:51:27.487| CacheManager::registerAction: registered mem 2009/08/16 22:51:27.487| aclDestroyACLs: invoked 2009/08/16 22:51:27.487| ACL::Prototype::Registered: invoked for type src 2009/08/16 22:51:27.487| ACL::Prototype::Registered: yes 2009/08/16 22:51:27.487| ACL::FindByName 'all' 2009/08/16 22:51:27.487| ACL::FindByName found no match 2009/08/16 22:51:27.487| aclParseAclLine: Creating ACL 'all' 2009/08/16 22:51:27.487| ACL::Prototype::Factory: cloning an object for type 'src' 2009/08/16 22:51:27.487| aclIpParseIpData: all 2009/08/16 22:51:27.487| aclIpParseIpData: magic 'all' found. 2009/08/16 22:51:27.487| aclParseAccessLine: looking for ACL name 'all' 2009/08/16 22:51:27.487| ACL::FindByName 'all' 2009/08/16 22:51:27.487| IpAddress.cc(498) LookupHostIP: Given Bad IP '255.255.255.255': unknown error 2009/08/16 22:51:27.487| IpAddress.cc(498) LookupHostIP: Given Bad IP '0.0.0.0': unknown error 2009/08/16 22:51:27.487| IpAddress.cc(498) LookupHostIP: Given Bad IP '255.255.255.255': unknown error 2009/08/16 22:51:27.487| IpAddress.cc(498) LookupHostIP: Given Bad IP '0.0.0.0': unknown error 2009/08/16 22:51:27.487| IpAddress.cc(498) LookupHostIP: Given Bad IP '255.255.255.255': unknown error 2009/08/16 22:51:27.487| Processing Configuration File: c:/squid/etc/squid.conf (depth 0) 2009/08/16 22:51:27.487| Processing: 'acl manager proto cache_object' 2009/08/16 22:51:27.487| ACL::Prototype::Registered: invoked for type proto 2009/08/16 22:51:27.487| ACL::Prototype::Registered: yes 2009/08/16 22:51:27.487| ACL::FindByName 'manager' 2009/08/16 22:51:27.487| ACL::FindByName found no match 2009/08/16 22:51:27.487| aclParseAclLine: Creating ACL 'manager' 2009/08/16 22:51:27.487| ACL::Prototype::Factory: cloning an object for type 'proto' 2009/08/16 22:51:27.487| Processing: 'acl localhost src 127.0.0.1/32' 2009/08/16 22:51:27.487| ACL::Prototype::Registered: invoked for type src 2009/08/16 22:51:27.487| ACL::Prototype::Registered: yes 2009/08/16 22:51:27.487| ACL::FindByName 'localhost' 2009/08/16 22:51:27.487| ACL::FindByName found no match 2009/08/16 22:51:27.487| aclParseAclLine: Creating ACL 'localhost' 2009/08/16 22:51:27.487| ACL::Prototype::Factory: cloning an object for type 'src' 2009/08/16 22:51:27.487| aclIpParseIpData: 127.0.0.1/32 2009/08/16 22:51:27.487| aclIpParseIpData: '127.0.0.1/32' matched: SCAN3-v4: %[0123456789.]/%[0123456789.] 2009/08/16 22:51:27.487| aclIpParseIpData: *addr1:1 addr1:127.0.0.1 q->addr1: 0.0.0.0 2009/08/16 22:51:27.487| IpAddress.cc(498) LookupHostIP: Given Bad IP '127.0.0.1': unknown error 2009/08/16 22:51:27.487| aclIpParseIpData: *addr1:1 addr1:127.0.0.1 q->addr1: 0.0.0.0 2009/08/16 22:51:27.487| aclIpParseIpData: unknown first address in '127.0.0.1/32' 2009/08/16 22:51:27.487| leave_suid: PID 5872 called FATAL: Bungled squid.conf line 2: acl localhost src 127.0.0.1/32 Squid Cache (Version 3.1.0.13): Terminated abnormally. CPU Usage: 0.016 seconds = 0.000 user + 0.016 sys Maximum Resident Size: 5696 KB Page faults with physical i/o: 1464 -----Original Message----- From: Amos Jeffries [mailto:squid3@xxxxxxxxxxxxx] Sent: Sunday, 16 August 2009 10:25 PM To: Nevil Thatcher Cc: squid-users@xxxxxxxxxxxxxxx; Squid Developers Subject: Re: Building squid 3.1.0.13 on MS-Windows (minGW) CC'ing to squi-dev. This really should be over there. Maybe Guido can help. Nevil Thatcher wrote: > I have attempted this on 2 Widows PC's the First (work) Windows XP and at hoem Windows 7 > > Using squid -X I get the following output > > C:\squid\sbin>squid -X > 2009/08/16 20:18:11.683| command-line -X overrides: ALL,7 > 2009/08/16 20:18:11.683| signal: sig=31 func=sigusr2_handle: (0) No error > 2009/08/16 20:18:11.683| CacheManager::registerAction: registering legacy mem > 2009/08/16 20:18:11.683| CacheManager::findAction: looking for action mem > 2009/08/16 20:18:11.683| Action not found. > 2009/08/16 20:18:11.683| CacheManager::registerAction: registered mem > 2009/08/16 20:18:11.683| aclDestroyACLs: invoked > 2009/08/16 20:18:11.683| ACL::Prototype::Registered: invoked for type src > 2009/08/16 20:18:11.683| ACL::Prototype::Registered: yes > 2009/08/16 20:18:11.683| ACL::FindByName 'all' > 2009/08/16 20:18:11.683| ACL::FindByName found no match > 2009/08/16 20:18:11.683| aclParseAclLine: Creating ACL 'all' > 2009/08/16 20:18:11.683| ACL::Prototype::Factory: cloning an object for type 'src' > 2009/08/16 20:18:11.683| aclIpParseIpData: all > 2009/08/16 20:18:11.683| aclIpParseIpData: magic 'all' found. > 2009/08/16 20:18:11.683| aclParseAccessLine: looking for ACL name 'all' > 2009/08/16 20:18:11.683| ACL::FindByName 'all' > 2009/08/16 20:18:11.683| Processing Configuration File: c:/squid/etc/squid.conf(depth 0) > 2009/08/16 20:18:11.683| Processing: 'acl manager proto cache_object' > 2009/08/16 20:18:11.683| ACL::Prototype::Registered: invoked for type proto > 2009/08/16 20:18:11.683| ACL::Prototype::Registered: yes > 2009/08/16 20:18:11.683| ACL::FindByName 'manager' > 2009/08/16 20:18:11.683| ACL::FindByName found no match > 2009/08/16 20:18:11.698| aclParseAclLine: Creating ACL 'manager' > 2009/08/16 20:18:11.698| ACL::Prototype::Factory: cloning an object for type 'proto' > 2009/08/16 20:18:11.698| Processing: 'acl localhost src 127.0.0.1/32' > 2009/08/16 20:18:11.698| ACL::Prototype::Registered: invoked for type src > 2009/08/16 20:18:11.698| ACL::Prototype::Registered: yes > 2009/08/16 20:18:11.698| ACL::FindByName 'localhost' > 2009/08/16 20:18:11.698| ACL::FindByName found no match > 2009/08/16 20:18:11.698| aclParseAclLine: Creating ACL 'localhost' > 2009/08/16 20:18:11.698| ACL::Prototype::Factory: cloning an object for type 'src' > 2009/08/16 20:18:11.698| aclIpParseIpData: 127.0.0.1/32 > 2009/08/16 20:18:11.698| aclIpParseIpData: '127.0.0.1/32' matched: SCAN3-v4: %[0123456789.]/%[0123456789.] > 2009/08/16 20:18:11.698| aclIpParseIpData: *addr1:1 addr1:127.0.0.1 q->addr1: 0.0.0.0 > 2009/08/16 20:18:11.698| aclIpParseIpData: unknown first address in '127.0.0.1/32' > 2009/08/16 20:18:11.698| leave_suid: PID 4208 called > FATAL: Bungled squid.conf line 2: acl localhost src 127.0.0.1/32 > Squid Cache (Version 3.1.0.13): Terminated abnormally. > CPU Usage: 0.016 seconds = 0.000 user + 0.016 sys > Maximum Resident Size: 5676 KB > Page faults with physical i/o: 1459 > > > Note: I added an extra debug statement above the point it is failing > > /* Decode addr1 */ > debugs(28, 0, "aclIpParseIpData: *addr1:" << *addr1 << " addr1:" << addr1 << " q->addr1: " << q->addr1); > if (!*addr1 || !(q->addr1 = addr1)) { > debugs(28, 0, "aclIpParseIpData: unknown first address in '" << t << "'"); > delete q; > self_destruct(); > return NULL; Your statement needs to be below as well. Before the failure point the q->addr1 is empty. It's also high time the IpAddress.cc code debugs were activated. If you can add this patch some other things will start to show: === modified file 'src/ip/IpAddress.cc' --- src/ip/IpAddress.cc 2009-04-07 13:51:57 +0000 +++ src/ip/IpAddress.cc 2009-08-16 12:12:14 +0000 @@ -36,6 +36,7 @@ #include "config.h" #include "ip/IpAddress.h" +#include "Debug.h" #include "util.h" @@ -56,15 +57,6 @@ #error "INET6 defined but has been deprecated! Try running bootstrap and configure again." #endif -/* We want to use the debug routines when running as module of squid. */ -/* otherwise fallback to printf if those are not available. */ -#ifndef SQUID_DEBUG -# define debugs(a,b,c) // drop. -#else -#warning "IpAddress built with Debugs!!" -# include "../src/Debug.h" -#endif - #if !USE_IPV6 // So there are some places where I will drop to using Macros too. // At least I can restrict them to this file so they don't corrupt the app with C code. Amos > > -----Original Message----- > From: Amos Jeffries [mailto:squid3@xxxxxxxxxxxxx] > Sent: Sunday, 16 August 2009 2:22 PM > To: Nevil Thatcher > Cc: squid-users@xxxxxxxxxxxxxxx > Subject: Re: Building squid 3.1.0.13 on MS-Windows (minGW) > > Nevil Thatcher wrote: >> I have tried downgrading >> >> minGW runtime from 3.15.2 to 3.14 >> w32api 3.13 to 3.11 >> >> and rebuild - no change to result, squid still fails to start with error: >> >> 2009/08/16 11:41:30| aclIpParseIpData: unknown first address in '127.0.0.1/32' >> FATAL: Bungled squid.conf line 2: acl localhost src 127.0.0.1/32 >> Squid Cache (Version 3.1.0.13): Terminated abnormally. >> CPU Usage: 0.016 seconds = 0.000 user + 0.016 sys >> Maximum Resident Size: 5644 KB >> Page faults with physical i/o: 1461 >> >> >> I alos download squid-3.0.18STABLE src and compiled using same build environment and this worked successfully. >> >> So it appears to be something with the squid 3.1 build?? > > Yes. 3.1 introduces a few different functions for IPv6. The parsing > syntax is also sightly different. > > The first thing to try is see what the parse shows when squid is run > with the -X option. There should be some lines above the error > indicating whether the IP text was converted to anything. > > > > What version of windows is this? > (I'm not familiar with the API numberings vs releases) > > It may be one of the functions needs a windows wrapper. There are a > small set of these in compat/os/mswin.h (look for "namespace Squid" to > see how its done. > > It is a bit strange that that does not appear at build time though. > > Amos > >> Cheers >> Nevil >> -----Original Message----- >> From: Nevil Thatcher [mailto:nevilth@xxxxxxxxxx] >> Sent: Saturday, 15 August 2009 5:15 PM >> To: 'Henrik Nordstrom' >> Cc: 'squid-users@xxxxxxxxxxxxxxx' >> Subject: RE: Building squid 3.1.0.13 on MS-Windows (minGW) >> >> Hi Henrik, >> >> We are using MinGW 5.1.4 >> >> I tried compiling with ac_cv_func_inet_pton=no but no change in behaviour. >> >> >> I will try to get a previous version of MinGW and try that >> >> Cheers >> Nevil >> >> -----Original Message----- >> From: Henrik Nordstrom [mailto:henrik@xxxxxxxxxxxxxxxxxxx] >> Sent: Saturday, 15 August 2009 8:30 AM >> To: Nevil Thatcher >> Cc: squid-users@xxxxxxxxxxxxxxx >> Subject: Re: Building squid 3.1.0.13 on MS-Windows (minGW) >> >> lör 2009-08-15 klockan 07:45 +1000 skrev Nevil Thatcher: >> >>> 2009/08/14 22:45:11| aclIpParseIpData: unknown first address in >>> '127.0.0.1/32' >>> FATAL: Bungled squid.conf line 2: acl localhost src 127.0.0.1/32 >> Sounds like inet_pton is broken in your MinGW install somehow.. or that >> inet_pton is not what we expect it to be... >> >> Which MinGW version are you using? >> >> Also try adding ac_cv_func_inet_pton=no to your configure line, forcing >> it to use the bundled inet_pton version instead of what is provided by >> MinGW. >> >> Regards >> Henrik >> >> > > -- Please be using Current Stable Squid 2.7.STABLE6 or 3.0.STABLE18 Current Beta Squid 3.1.0.13
