Hello, i´m trying setup tproxy4 + wccp2 + squid 3.1 but i don´t know whats happens.. squid + wccp2 works fine.. my network scheme: http://img269.imageshack.us/img269/2286/19551413.jpg my squid.conf: http_port 3129 tproxy transparent .. wccp2_router 66.0.0.1 wccp2_forwarding_method 1 wccp2_return_method 1 wccp2_service standard 0 wccp2_address 66.0.0.3 wccp2_service dynamic 80 wccp2_service_info 80 protocol=tcp flags=dst_ip_hash priority=240 ports=80 wccp2_service dynamic 90 wccp2_service_info 90 protocol=tcp flags=src_ip_hash,ports_source priority=240 ports=80 iptables: iptables -t mangle -N DIVERT iptables -t mangle -A DIVERT -j MARK --set-mark 1 iptables -t mangle -A DIVERT -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT iptables -t mangle -A PREROUTING -i wccp0 -p tcp --dport 80 -j TPROXY --tproxy-mark 0x1/0x1 --on-port 3129 ip rule add fwmark 1 lookup 100 ip route add local 0.0.0.0/0 dev lo table 100 cisco: ! ip wccp 80 ip wccp 90 ! interface FastEthernet 0/0 ip wccp 80 redirect in ip wccp 90 redirect out ! i can see packets comming from router to wccp0 interface on linux... but can´t access web where is the problem ?! thanks !! -- Sds. Alexandre Jeronimo Correa Onda Internet www.onda.net.br IPV6 Ready ! www.ipv6.onda.net.br
