I think your "acl" lines are wrong. They should read:
acl ip1 src 10.0.0.120
acl ip2 src 10.0.0.121
acl ip3 src 10.0.0.122
Regards
HASSAN
----- Original Message -----
From: "Chris Robertson" <crobertson@xxxxxxx>
To: <squid-users@xxxxxxxxxxxxxxx>
Sent: Wednesday, May 20, 2009 02:59
Subject: Re: tcp_outgoing_address Not working
RSCL Mumbai wrote:
Hi,
I have setup "tcp_outgoing_address" as follows:
-----------
acl ip1 myip 10.0.0.120
acl ip2 myip 10.0.0.121
acl ip3 myip 10.0.0.122
tcp_outgoing_address 10.0.0.120 ip1
tcp_outgoing_address 10.0.0.121 ip2
tcp_outgoing_address 10.0.0.122 ip3
----------
I have route2 rules which will change the g/w IP for the packets based
on the above rules.
Example: if SRC=10.0.0.120 then G/w=10.0.0.1 etc
tcp_outgoing_address does not seem to be working;
Have you set "server_persistent_connections off"?
How can I verify is the SOURCE_IP is manitained ?
The manager interface will show IPs and port (both client and server)
for current client connections.
ELSE:
Where else should I check to learn why the SRC IP is not maintained.
Please help.
Thx
Vai
Chris