Eric Valencia wrote:
Yes. Details please!!!
On Mon, Mar 30, 2009 at 5:00 PM, Amos Jeffries <squid3@xxxxxxxxxxxxx> wrote:
Yan Seiner wrote:
On Mon, March 30, 2009 4:21 pm, Amos Jeffries wrote:
On the other hand if you have been assigned even one IP from your
current ISP then you have access to a full /48 of 2002:: IPv6 space free
of additional charge right now.
??? Where can I find out about this? I'm going to guess my ISP (a small,
local outfit) probably has not heard of this before.
--Yan
Look up 6to4 IPv6 prefix. Most OS can have a gateway easily enabled.
Wikipedia has some good coverage at http://en.wikipedia.org/wiki/6to4
The details are largely off-topic here. That wiki page provides some
good quality links and information you can use as a starting point for
research. There is a lot of deeper detailed content and help around the
web once you know what to look for.
This is all I can do at present, the specifics of transition are
different for every network so handing you a config is not safe until
you know what it means. The whole rest of the Internet is mid-transition
right now software and hardware alike still vary a lot in what they can
do. Read up on IPv6 transition and once you know what your IPv6 rollout
needs to look like you will know what to go forward with.
Back on topic with a blatant marketing edge:
Squid-3.1 is the release which allows you to handle both IPv4 and
IPv6 web requests and replies. To solve the issues of HTTP access
between each of those spaces.
Amos
--
Please be using
Current Stable Squid 2.7.STABLE6 or 3.0.STABLE13
Current Beta Squid 3.1.0.6
