> > Hi everyone, > > Here is my goal: > I would like for my laptop users to be routed through my public squid > proxy > so that when they are anywhere, including in a hotel/coffee shop/etc, > their > traffic is coming through us. > > After asking around and researching some options, one interesting option > includes using squid in a way I had never thought of. > > The setup I saw had one Squid server as a standard Internet facing proxy > server (nothing special about that). The interesting thing was they also > had > installed Squid locally on the laptop clients and ran Squid using the > cache_peer option to forward all traffic to the standard Squid server > (this > is somewhat guesswork because the setup I saw is closed source, but I had > some clues that points me in this direction). > > NOTE: > SquidNT (2.7.STABLE5 on server, 2.7.STABLE6 on clients) Windows XP SP3 on > clients Windows 2003 Server for server role Clients all have proxy > settings > set to localhost on port 3128 Server is listening on port 80 This is an AD > domain, all settings pushed by GPO's. > Users running with user rights, and machines are fairly locked down (can't > touch the options in IE) > server- internet facing Squid server running normal proxy service > client- laptop computers running Squid and forwarding all requests to the > server using cache_peer > > I have gotten both the Squid server and Squid client up and running, with > a > few problems/questions. > > 1. I have the forwarding working in some manor. The problem I have is I > have > the public facing server set up to require authentication. I have tried > the > login=user:password option for cache_peer on the client side, still with > no > luck. When looking at the the access logs on the server, the Squid client > isn't passing the credentials supplied to the Squid server (ie. see below) > > 1237037364.556 0 68.117.163.156 TCP_DENIED/407 1804 GET > http://yahoo.com/ - NONE/- text/html It's likely your squid is only sending basic authentication back to the peer. Squid does not do NTLM etc between peers. You will need to add basic as one of the auth methods last on the list. > > 2. I also am looking for an option in squid.conf that essentially says "if > you cant reach the cache_peer, then go direct for this query". Hopefully > this will resolve the problems I have been having in hot spots with > captive > portals. I have looked at always_direct and never_direct, but after > reading, > it doesn't look either of those are what I am looking for. I would expect > this to allow the authentication to the captive portal, but as soon as the > cache_peer was reachable, for all traffic to be redirected to it. Settign cache_peer to a parent cache with "default" option and the "prefer_direct deny all" should do what you want. > > 3. Lastly, I am interested in using SSL to encrypt the traffic going from > the client to the server. I am using the SSL version of SquidNT > (http://squid.acmeconsulting.it/download/squid-2.7.STABLE6-bin-SSL.zip), > so > the options are available, I just have not found any good documentation on > how to set this up (specifically, what has to be configured on the server > side (the client settings seem pretty strait forward, the stuff I have > found > is always for setting up SSL redirects/etc. for web servers using > acceleration mode). Search the squid wiki: http://wiki.squid-cache.org > > If I need to provide any further information, please let me know. Thanks > for > any help/suggestions, have a good one! > > Josh > > > Before I came to trying Squid in this manor, here were other ways I tried > to > proxy users sessions. > > 1. A simple proxy setting in Internet Explorer to point all traffic back > through the public proxy. This fails in the following way: Say a user is > at > a hot spot with a captive portal that requires authentication. This sets > it > up a problem where the browser cant get to the proxy server because of the > captive portal, and cant authenticate to the captive portal because of the > proxy settings (and bypass proxy server for local addresses wont work > because a lot of captive portals authenticate to non local addresses). > 2. PAC files- I thought this was going to be the answer, but unfortunately > this leaves too many holes open. The problem is that when the user first > logs on to a hot spot, the browser cant talk to the proxy (because the > user > isn't authenticated yet to the captive portal), so everything is direct > (unfiltered, not good). It takes the user having to close and then open > the > browser again before the session would be directed to the proxy (again, > not > good). > > NOTE: All this is worthless is some situations, as some hot spots don't > allow proxy connections (even if they are going to a proxy on port 80). > > Here is my client squid.conf (without commenting for brevity ;) > WELCOME TO SQUID 2.7.STABLE6 > auth_param ntlm program c:/squid/libexec/mswin_ntlm_auth.exe > auth_param ntlm children 5 > auth_param ntlm keep_alive > onexternal_acl_type win_domain_group ttl=300 %LOGIN > c:/squid/libexec/mswin_check_lm_group.exe -G -c acl all src all > acl manager proto cache_object > acl localhost src 127.0.0.1/32 > acl to_localhost dst 127.0.0.0/8 > acl localnet src 10.0.0.0/8 > acl localnet src 172.16.0.0/12 > acl localnet src 192.168.0.0/16 > acl SSL_ports port 443 > acl Safe_ports port 80 > acl Safe_ports port 21 > acl Safe_ports port 443 > acl Safe_ports port 70 > acl Safe_ports port 210 > acl Safe_ports port 1025-65535 > acl Safe_ports port 280 > acl Safe_ports port 488 > acl Safe_ports port 591 > acl Safe_ports port 777 > acl CONNECT method CONNECT > http_access allow all #this is for testing ONLY > http_access allow manager localhost > http_access deny manager > http_access deny !Safe_ports > http_access deny CONNECT !SSL_ports > http_access allow localnet > http_access deny all > icp_access allow localnet > icp_access deny all > http_port 3128 > cache_peer squidserver.com parent 80 0 proxy-only no-query > hierarchy_stoplist cgi-bin ? > access_log c:/squid/var/logs/access.log squid > cache deny all > refresh_pattern ^ftp: 1440 20% 10080 > refresh_pattern ^gopher: 1440 0% 1440 > refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 > refresh_pattern . 0 20% 4320 > acl shoutcast rep_header X-HTTP09-First-Line ^ICY.[0-9] > upgrade_http0.9 deny shoutcast > acl apache rep_header Server ^Apache > broken_vary_encoding allow apacheprefer_direct off > coredump_dir c:/squid/var/cache > > > -- > View this message in context: > http://www.nabble.com/SquidNT-cache_peer-authentication-encryption-failover-tp22540738p22540738.html > Sent from the Squid - Users mailing list archive at Nabble.com. > >
