Hi All,
Two wccp services 80, 90 is detected by the router. 80 - outgoing,
90-incoming. But return traffic does not comes to squid. No packets
redirected by the service 90.
Router IOS version is
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version
12.4(13b), RELEASE SOFTWARE (fc3). Any bug in this IOS version.
Global WCCP information:
Router information:
Router Identifier: xx.xx.xx.xx
Protocol Version: 2.0
Service Identifier: 80
Number of Service Group Clients: 1
Number of Service Group Routers: 1
Total Packets s/w Redirected: 1146
Process: 0
Fast: 0
CEF: 1146
Redirect access-list: 15
Total Packets Denied Redirect: 2814525
Total Packets Unassigned: 15328
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
Total Bypassed Packets Received: 0
Service Identifier: 90
Number of Service Group Clients: 1
Number of Service Group Routers: 1
Total Packets s/w Redirected: 0
Process: 0
Fast: 0
CEF: 0
Redirect access-list: 15
Total Packets Denied Redirect: 3143419
Total Packets Unassigned: 17297
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
Total Bypassed Packets Received: 0
Squid configuration :
wccp2_service dynamic 80
wccp2_service_info 80 protocol=tcp flags=src_ip_hash priority=240
ports=80
wccp2_service dynamic 90
wccp2_service_info 90 protocol=tcp flags=dst_ip_hash,ports_source
priority=240 ports=80
But it works good in transparent mode.
Thanks in advance.
Thanks
Vk.
________________________________________________________________________
You are invited to Get a Free AOL Email ID. - http://webmail.aol.in
