Search squid archive

Re: transparent proxy not working!! any advice?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,
actually I have both of set on the lan interface ( am I mistaken to set the "redirect out" on the lan interface? should I be setting it on the interface facing the internet?)

ip wccp 80 redirect in
ip wccp 90 redirect out

as for the wiki provided, I fail to see what's missing!
obviously there is something, but I'm not detecting it!



--------------------------------------------------
From: "Regardt van de Vyver" <squid@xxxxxxxxxxx>
Sent: Monday, January 05, 2009 12:46 AM
Cc: <squid-users@xxxxxxxxxxxxxxx>
Subject: Re:  transparent proxy not working!! any advice?

Roland Roland wrote:
Hello,
the output of the debugging is as such:



*Jan 4 23:16:43.205: WCCP-EVNT:D90: Here_I_Am packet from 192.168.0.183: service not active *Jan 4 23:16:43.205: WCCP-EVNT:D80: Here_I_Am packet from 192.168.0.183: service not active

what service is that?!



--------------------------------------------------
From: "Regardt van de Vyver" <squid@xxxxxxxxxxx>
Sent: Sunday, January 04, 2009 9:33 PM
Cc: <squid-users@xxxxxxxxxxxxxxx>
Subject: Re:  transparent proxy not working!! any advice?

Roland Roland wrote:
i've just created a new box with the following options:
but wccp with router is still not working!
any advice?


using centos 5.2
and squid 2.6
firewall enabled
SElinux permissive
-------------------------------------------------------
done the following:

yum update yum

yum install squid

squid -z
-------------------------------------------------------
gedit /etc/rc.d/init.d/rc.local

#added:
modprobe ip_gre
ifconfig gre0 192.168.0.183 netmask 255.255.255.0 up
#this is the same ip as my eth0

----------------------------------------------------
gedit /etc/sysconfig/iptables

#added:
-A INPUT -i gre0 -j ACCEPT
-A INPUT -i gre0 -j ACCEPT
-A INPUT -p gre -j ACCEPT
#my routers lan interface 192.168.0.1
-A RH-Firewall-1-INPUT -s 192.168.0.1/24 -p udp -m udp --dport 2048 -j
ACCEPT
-------------------------------------------------------
service iptables condrestart
--------------------------------------------------------
gedit /etc/squid/squid.conf

#edited/added the follwoing:
http_port 80 transparent
http_access allow all
wccp2_router 192.168.0.1
wccp_version 4
wccp2_rebuild_wait on
wccp2_forwarding_method 1
wccp2_return_method 1
wccp2_assignment_method 1
wccp2_service dynamic 80
wccp2_service dynamic 90
wccp2_service_info 80 protocol=tcp flags=src_ip_hash priority=240 ports=80
wccp2_service_info 90 protocol=tcp flags=dst_ip_hash,ports_source
priority=240 ports=80
----------------------------------------------------------
Cisco router 2811 side:

conf t
ip wccp version 2
ip wccp web-cache

int f0/1 (Lan interface)
ip wccp 80 redirect in
ip wccp 90 redirect out
----------------------------------------------------------
service squid restart

then sh ip wccp on router gave me all hits as 0 no hits from squid to
router!!
----------------------------------------------------------

service iptables status

[root@localhost ~]# service iptables status
Table: filter
Chain INPUT (policy ACCEPT)
num  target     prot opt source               destination
1    RH-Firewall-1-INPUT  all  --  0.0.0.0/0            0.0.0.0/0
2    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
3    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
4    ACCEPT     47   --  0.0.0.0/0            0.0.0.0/0

Chain FORWARD (policy ACCEPT)
num  target     prot opt source               destination
1    RH-Firewall-1-INPUT  all  --  0.0.0.0/0            0.0.0.0/0

Chain OUTPUT (policy ACCEPT)
num  target     prot opt source               destination

Chain RH-Firewall-1-INPUT (2 references)
num  target     prot opt source               destination
1    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
2 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type
255
3    ACCEPT     esp  --  0.0.0.0/0            0.0.0.0/0
4    ACCEPT     ah   --  0.0.0.0/0            0.0.0.0/0
5    ACCEPT     udp  --  0.0.0.0/0            224.0.0.251         udp
dpt:5353
6    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp
dpt:631
7    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:631
8    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state
RELATED,ESTABLISHED
9 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW
tcp dpt:22
10 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW
tcp dpt:80
11 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW
tcp dpt:5900
12   ACCEPT     udp  --  192.168.0.0/24       0.0.0.0/0           udp
dpt:2048
13   REJECT     all  --  0.0.0.0/0            0.0.0.0/0
reject-with icmp-host-prohibited


---------------------------------------------------------------------------



lsmod:

Module                  Size  Used by
ip_conntrack_netbios_ns     6977  0
xt_state                6209  4
ip_conntrack           53025  2 ip_conntrack_netbios_ns,xt_state
nfnetlink              10713  1 ip_conntrack
iptable_filter          7105  1
ip_tables              17029  1 iptable_filter
ip6table_filter         6849  1
ip6_tables             18053  1 ip6table_filter
nls_utf8                6208  1
ip_gre                 16737  0
autofs4                24517  2
hidp                   23105  2
rfcomm                 42457  0
l2cap                  29505  10 hidp,rfcomm
bluetooth              53797  5 hidp,rfcomm,l2cap
sunrpc                144893  1
ipt_REJECT              9537  1
ip6t_REJECT             9409  1
xt_tcpudp               7105  15
x_tables               17349  6
xt_state,ip_tables,ip6_tables,ipt_REJECT,ip6t_REJECT,xt_tcpudp
dm_multipath           22089  0
video                  21193  0
sbs                    18533  0
backlight              10049  1 video
i2c_ec                  9025  1 sbs
button                 10705  0
battery                13637  0
asus_acpi              19289  0
ac                      9157  0
ipv6                  258273  17 ip6t_REJECT
xfrm_nalgo             13765  1 ipv6
crypto_api             11969  1 xfrm_nalgo
lp                     15849  0
floppy                 57125  0
i2c_piix4              12237  0
pcnet32                35141  0
pcspkr                  7105  0
i2c_core               23745  2 i2c_ec,i2c_piix4
mii                     9409  1 pcnet32
ide_cd                 40033  1
cdrom                  36705  1 ide_cd
parport_pc             29157  1
serio_raw              10693  0
parport                37513  2 lp,parport_pc
dm_snapshot            21477  0
dm_zero                 6209  0
dm_mirror              29125  0
dm_mod 61405 9 dm_multipath,dm_snapshot,dm_zero,dm_mirror
ata_piix               22341  0
libata                143997  1 ata_piix
sd_mod                 24897  0
scsi_mod              134605  2 libata,sd_mod
ext3                  123593  2
jbd                    56553  1 ext3
uhci_hcd               25421  0
ohci_hcd               23261  0
ehci_hcd               33357  0

------------------------------------------------------------------------


ifconfig:

[root@localhost ~]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0C:29:F8:D0:AF
inet addr:192.168.0.183 Bcast:192.168.0.255 Mask:255.255.255.0
         inet6 addr: fe80::20c:29ff:fef8:d0af/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:29956 errors:0 dropped:0 overruns:0 frame:0
         TX packets:11948 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:3673892 (3.5 MiB)  TX bytes:7234153 (6.8 MiB)
         Interrupt:169 Base address:0x2000

gre0      Link encap:UNSPEC  HWaddr
00-00-00-00-B2-BF-68-33-00-00-00-00-00-00-00-00
         inet addr:192.168.0.183  Mask:255.255.255.0
         UP RUNNING NOARP  MTU:1476  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         inet6 addr: ::1/128 Scope:Host
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:2926 errors:0 dropped:0 overruns:0 frame:0
         TX packets:2926 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:3257748 (3.1 MiB)  TX bytes:3257748 (3.1 MiB)

-------------------------------------------------------------------------------



Hi Roland,

Have you had a look at the WCCP debugging messages on the Cisco?
eg. on the cisco
   debug ip wccp events
   debug ip wccp packets
   terminal monitor

That should give you some indication of wccp activity, also what does "sh ip wccp web-cache detail" show?

Regardt



Hi Roland,

Off the bat I'd guess its a missing
"ip wccp 80" and a "ip wccp 90" on the Cisco.

Also, just rechecking your config I'm wondering about missing /proc bits as per:
http://wiki.squid-cache.org/ConfigExamples/MultiplePortsWithWccp2

Regardt



[Index of Archives]     [Linux Audio Users]     [Samba]     [Big List of Linux Books]     [Linux USB]     [Yosemite News]

  Powered by Linux