> Amos, > > I was not there when squid was compiled on the server, I am not able > to find the configure file for squid. "squid -v" will list the configure options squid was built with. > So, will removing squid and reinstalling work? It will. Though the removal should not be necessary. Simply re-building the source with the same location options and finishing with a "make install" should work. You need to be careful about using the same configure options for folder and file locations though. Amos > > Regards, > Avinash > > > On Fri, Oct 10, 2008 at 2:35 PM, Amos Jeffries <squid3@xxxxxxxxxxxxx> > wrote: >> Avinash Rao wrote: >>> >>> Yes, I built squid myself. i downloaded the files from the squid site >>> and installed it. >>> >>> Are you asking me rebuild squid using these options --enable-auth >>> --enable-{auth type}-auth-helpers={helper names} >>> >>> Ok, let me try this and get back if necessary. >> >> Check the ones you have already. You may not need a full rebuild. >> If the helper you want to use and its auth type are missing then yes you >> will have to add hem and rebuild. >> >> Amos >> >>> >>> >>> Thanks so much for your time. >>> Avinash >>> >>> >>> >>> >>> On Wed, Oct 8, 2008 at 4:18 PM, Amos Jeffries <squid3@xxxxxxxxxxxxx> >>> wrote: >>>> >>>> Avinash Rao wrote: >>>>> >>>>> I went through the documentation. I need help in installing the >>>>> auth_proxy >>>>> module. I didn't install squid from Synaptic Manager, i did it >>>>> manually! >>>>> so, >>>>> the helpers directory is missing on my system and i am not able to >>>>> find >>>>> the >>>>> squid authenticators. >>>>> >>>>> Is there anyway i can get this? >>>>> >>>> You built squid yourself? >>>> >>>> Add some configure options to build the helpers and squid auth >>>> components: >>>> >>>> --enable-auth >>>> --enable-{auth type}-auth-helpers={helper names} >>>> >>>> and rebuild. >>>> >>>> ./configure --help shows the options and how to find out whats >>>> available. >>>> >>>> Amos >>>> >>>>> >>>>> >>>>> >>>>> On Thu, Oct 2, 2008 at 10:24 AM, Avinash Rao <avinash.aol@xxxxxxxxx >>>>> <mailto:avinash.aol@xxxxxxxxx>> wrote: >>>>> >>>>> thanks and i will check it today. >>>>> >>>>> On Thu, Oct 2, 2008 at 9:09 AM, Amos Jeffries <squid3@xxxxxxxxxxxxx >>>>> <mailto:squid3@xxxxxxxxxxxxx>> wrote: >>>>> > >>>>> > > Amos, >>>>> > > >>>>> > > Thank you for the information. I will go through the doc, test >>>>> it and get >>>>> > > back if necessary. >>>>> > > If i wrote my requirement right in my last email, the samba >>>>> users can get >>>>> > > access to internet only between 18:00 - 20:00 Hrs everyday. >>>>> > >>>>> > Ah, sorry. you wrote it right. I read it wrong. >>>>> > >>>>> > The http_access line should be: >>>>> > http_access deny !deadHours sambaUsers >>>>> > >>>>> > and the name makes better sense being okayHours instead of >>>>> deadHours. >>>>> > >>>>> > Amos >>>>> > >>>>> > > >>>>> > > Thanks again >>>>> > > Avinash >>>>> > > >>>>> > > On Thu, Oct 2, 2008 at 7:42 AM, Amos Jeffries >>>>> <squid3@xxxxxxxxxxxxx <mailto:squid3@xxxxxxxxxxxxx>> >>>>> > > wrote: >>>>> > > >>>>> > >> > Hi all, >>>>> > >> > >>>>> > >> > I have configured the latest version of squid on Ubuntu >>>>> Studio 8.0 - >>>>> > >> > AMD 64bit. I have also configured samba. >>>>> > >> > I am in need of blocking the samba users from accessing the >>>>> internet >>>>> > >> > anytime except 18:00 - 20:00 Hrs everyday. How do i do >>>>> this? >>>>> > >> > The samba is configured as a PDC with WinXP clients. >>>>> > >> > >>>>> > >> >>>>> > >> Standard samba config. >>>>> > >> http://wiki.squid-cache.org/SquidFaq/ProxyAuthentication >>>>> > >> >>>>> > >> Then this at the appropriate place of your config: >>>>> > >> >>>>> > >> acl sambaUsers proxy_auth REQUIRED >>>>> > >> acl deadHours time 18:00-20:00 >>>>> > >> http_access deny deadHours sambaUsers >>>>> > >> >>>>> > >> >>>>> > >> Amos >>>>> > >> >>>>> > >> >>>>> > > >>>>> > >>>>> > >>>>> >>>>> >>>> >>>> -- >>>> Please use Squid 2.7.STABLE4 or 3.0.STABLE9 >>>> >> >> >> -- >> Please use Squid 2.7.STABLE4 or 3.0.STABLE9 >> >