my mistake,after all usernames under the commands i entered my password of course like abdayioglugil BLANKSPACE pass > From: batuhandayioglugil@xxxxxxxxxxx > To: henrik@xxxxxxxxxxxxxxxxxxx; squid-users@xxxxxxxxxxxxxxx > Subject: ldap_auth problem,stuck!! > Date: Wed, 6 Aug 2008 17:15:08 +0000 > > > Hi > > i confiugured a proxy server (squid 2.6.STABLE14) on a machine (with ubuntu gutsy 7.10) and it has two ethernet cards,one of them for the wan and the other one is for lan (university lan).From my home i can use my proxy server very well (cache,acl...).the second thing that i want to do is to reach the ldap server in university but i can't. > > > i could never see 'OK' in the terminal,always 'ERR Success' or something else. > > i searched a lot in google and tried alot of commands before si configure squid.conf but nothing.to give you some info i'm writing those commands here, > > first of all i searched ldap server : > > bim @ bimproxy:~$ ldapsearch -x -b dc=gsu,dc=edu -h 10.99.1.1 uid=abdayioglugil > # extended LDIF > # > # LDAPv3 > # base with scope subtree > # filter: uid=abdayioglugil > # requesting: ALL > # > > # search reference > ref: ldap://gsu.edu/CN=Configuration,DC=gsu,DC=edu > > # search result > search: 2 > result: 0 Success > > # numResponses: 2 > # numReferences: 1 > > and i got the dn here,with that dn i tried to connect ldap server with my username and pass,which i use in university network for authentication,but no results. > > if i use this command without username i see computers connected to university network and their dn are like: > dn: DC=gsu-pc,DC=gsu.edu,CN=MicrosoftDNS,CN=System,DC=gsu,DC=edu > the DC=gsu.edu,CN=MicrosoftDNS,CN=System,DC=gsu,DC=edupart is always the same (*) > > now here some commands and results that i got: > > bim @ bimproxy:~$ /usr/lib/squid/ldap_auth -b "dc=gsu,dc=edu" -f "uid=%s" 10.99.1.1 > abdayioglugil > nothing > > bim @ bimproxy:~$ /usr/lib/squid/ldap_auth -b "dc=gsu,dc=edu" -f "uid=%s" -h 10.99.1.1 > abdayioglugil > squid_ldap_auth: WARNING, LDAP search error 'Can't contact LDAP server' > ERR Success > > i didn't understand this because the ip and dn are exactly correct > > bim @ bimproxy:~$ /usr/lib/squid/ldap_auth -b "dc=gsu,dc=edu" -h 10.99.1.1 > abdayioglugil > ERR Success > > after these commands i tried dn (*) that the other pc in the network use : > > bim @ bimproxy:~$ /usr/lib/squid/ldap_auth -b "dc=gsu,dc=edu" -D "DC=gsu.edu,CN=MicrosoftDNS,CN=System,DC=gsu,DC=edu" -h 10.99.1.1 > abdayioglugil > ERR Success > > that's a short summary of what i have done,i started to use squid about 2 months ago,learned a lot but not enough as always,if you have time i would be thankful for your help,i am really stuck in this subject. > > thanks > > batu > _________________________________________________________________ > Live.com'u deneyin: çevrimiçi dünyanızı bir araya getirin; haberler, spor, hava durumu ve çok daha fazlası. > http://www.live.com/getstarted _________________________________________________________________ Live.com'u deneyin: çevrimiçi dünyanızı bir araya getirin; haberler, spor, hava durumu ve çok daha fazlası. http://www.live.com/getstarted
