Amos Jeffries-2 wrote: > > ananttickoo wrote: >> >> >> ananttickoo wrote: >>> i am trying to set up a squid but its not asking for authentication.. >>> were >>> am i going wrong i not able to find out >>> this is what i am doing >>> >>> >>> i am using UBUNTU >>> >>> NIC that i am using is having ip 192.168.7.253 >>> >>> static ip-192.168.7.253 >>> netmask-255.255.255.0 >>> gateway address-192.168.7.254 >>> >>> give my pc a name in host file >>> 192.168.7.253 = testmachine >>> >>> then install squid >>> 2}apt-get install squid-common >>> 3}apt-get install apache2-utils >>> >>> 4)then chown proxy:proxy /etc/squid/squid.conf >>> 5)now create user htpasswd -c /etc/squid/passwd garima >>> passwrd -garima >>> 6} chmod o+r /etc/squid/passwd >>> 7)then i do the setting squid.conf >>> >>> 1}auth_param basic program /usr/lib/squid/ncsa_users /etc/squid/passwd >>> auth_param basic children 5 >>> auth_param basic realm SQUID s there >>> auth_param basic credtinal 2 hours >>> auth_param basic cassesitive 0ff >>> now acl list >>> 2}acl ncsa_users proxy_auth REQUIRED >>> acl internal_network src 192.168.7.253 >>> acl password proxy_auth REQUIRED >>> now http turn >>> 3}http_access allow internal_network >>> http_access allow ncsa_users >>> http_access allow password >>> now save nd close this >>> 8}now http_port 3128 >>> 9}now we have to rout the traffic >>> iptables -L >>> it will show firewalls are disable >>> 10}vi /etc/iptables.rules >>> now add >>> iptables -t nat -A PREROUTING -i eth0 -p tcp ---dport 80 -j REDIRECT >>> --to-port 3128 >>> save and close this >>> 11)now do iptables-save > /etc/iptables.rules >>> 12) now to vi /etc/network/interfaces >>> 13)now /etc/init.d/squid restart >>> 14)now /etc/init.d/networking restart >>> >>> >>> its still not working ... not asking for password >>> >>> >>> were am i going wrong >>> >> >> >> only thing i have messed with is that i have redirected the port 80 to >> 3128. >> that has messed the whole thing up ... >> > > Did you see my earlier reply? > Standard Authentication cannot be done on intercepted requests. > Client either have knowledge of the proxy and authenticates, or doesn't. > > Amos > -- > Please use Squid 2.7.STABLE3 or 3.0.STABLE7 > > sorry i am a new to this .. if only you could explain. or just give me some link were i can get knowladge abt this.... -- View this message in context: http://www.nabble.com/squid-not-asking-for-authentication-tp18507653p18522769.html Sent from the Squid - Users mailing list archive at Nabble.com.
