Hi Peter again!
I have these two scenarios here: machines conected at the domain, and the
personal notebooks (from students and teachers - I work at an university).
The students gain access through wireless - but they have to authenticate.
On the other side, our machines doesn't need to authenticate to access the
Internet - the logon credential is accepted for Squid. It's totally
transparent to the user. All the access are registered in the Squid logs -
date/time/username/site...
And the only way we found to do this was integrating the Linux Server with
SAMBA. We have 1.500 workstations, and this is the only way to register user
access.
Hope it helps
Regards!
Luis - Brazil
----- Original Message -----
From: "Jevos, Peter" <Peter.Jevos@xxxxxxxxxxxx>
To: "Luis Claudio Botelho - Chefe de Tecnologia e Redes"
<lbotelho@xxxxxxxxxx>; <squid-users@xxxxxxxxxxxxxxx>
Sent: Wednesday, June 11, 2008 9:23 AM
Subject: RE: FW: How to improve integratin of LDAP
authentication
-----Original Message-----
From: Luis Claudio Botelho - Chefe de Tecnologia e Redes
[mailto:lbotelho@xxxxxxxxxx]
Sent: Wednesday, June 11, 2008 2:20 PM
To: Jevos, Peter; squid-users@xxxxxxxxxxxxxxx
Subject: Re: FW: How to improve integratin of LDAP
authentication
Hi Peter
We have this configuration here in my job.
My workstations doesn't ask for login and password because they are
integrated in the domain.
Only the workstations that doesn't belong to the domain ask for
user/password.
The question is: is your workstation connected to the domain? Have you
configured SAMBA in your Linux Server?
Regards!
Luis Claudio Botelho
Brazil
Thanks for your answer Luis
Of coursse our stations are connected into the domain.
I'm not using samba yet ( but it'spossible )
But all i'd like ot know is a brief principle how it works ( or brief
howto )
Thx
pet
Hi,
I'd like to ask you one question.
I have ldap authentication against AD that works perfectly.
My config is:
auth_param basic program /usr/local/squid/libexec/squid_ldap_auth -R
-b
"dc=x, dc=x" -D "cn=x,ou=x,ou=x,dc=x,dc=x,dc=x" -w "x" -f
sAMAccountName=%s -h 10.0.0.1 -p 3268
When I run it login window apperas to insert login credentials. And
that's fine and it works.
My question is: Is it possible to hand over this credentials from MS
Windows login credentials automatically ( like domainname\user ) ?
The reason is to avoid the interuption with login window. So probably
squid should be somehow dig out this credentials from the system
Is it actually possible ?
Thx
pet
