Armend ALIAGA wrote:
Hi,
yes the network set is like this :
clients ---> 2ndsquidproxy ---> 1stsquidproxy(its ip is 10.10.10.1)
--> PIX firewall ( this IP 10.10.10.1 is NATed )
The squid.conf is like this :cache_peer 10.10.10.1 parent 3128 0 no-query default
acl LAN src 10.10.10.1/24
http_access allow LAN
never_direct allow all
Starting WWW-proxy squid startproc: exit status of parent of /usr/sbin/squid: 1
failed
Start squid manually straight on the binary. There are required config
options missing. cache_dir at least. Some others which the binary will
mention in its abort messages to the screen.
Amos
----- Original Message ----
From: Indunil Jayasooriya <indunil75@xxxxxxxxx>
To: Armend ALIAGA <aliaga038@xxxxxxxxx>
Cc: squid-users <squid-users@xxxxxxxxxxxxxxx>
Sent: Thursday, June 5, 2008 9:27:49 AM
Subject: Re: second squid proxy
On Tue, Jun 3, 2008 at 7:25 PM, Armend ALIAGA wrote:
Hi all,
I would be gratefull if somebody could help me out on this issue,
I have a squid proxy (.i.e. IP.10.10.10.1) running wonderfull up to now..
I set up another squid proxy ... and the issue is that I dont know how to
redirect all http requets from this one to the first proxy 10.10.10.1 without
going directly to internet ? ( I'am not allowed to NAT 2 IP in the pix ?!?)
I tried to do it with "cache peer parent 10.10.10.1 3128 3130" but I have
an
error when aplying policy.
thanks,
pls try belpw.
cache_peer 10.10.10.1 parent 3128 0 no-query default
acl all src 0.0.0.0/0.0.0.0
never_direct allow all
May I get your network set up with ips, if possible?
I think it is like this.
clients ---> 2ndsquidproxy ---> 1stsquidproxy(its ip is 10.10.10.1)
--> Your firewall
Hope to hear from you.
--
Thank you
Indunil Jayasooriya
THIS IS THE ERROR WHEN TRYING TO START SQUID AFTER THE CHANGES :
--
Please use Squid 2.7.STABLE1 or 3.0.STABLE6
