Just for everyone's future reference, I found the problem with my setup. There was a Barracuda Networks webfilter located between our Cisco ASA5520 and the Squid box. Even though Barracuda claims the webfilter should work fine with Squid, it broke my Squid/WCCP setup. In their defense, it does work fine with an inline Squid Proxy server, but doesn't like the WCCP setup. domboy wrote: > > Hello. I'm am having the exact same problem as described by Kevin, and got > to the end of this thread and I've tried all the things suggested. In > addition, I've tried it on both openSuse 10.3 (kernel 2.6.18.8-0.7-bigsmp) > and Debian 4 (kernel 2.6.18-4) and finally Novell Suse Linux Enterprise > Server 10 SP1 (kernel 2.6.16.54-0.2.3-bigsmp), all with the same issue. Is > there anything else to try?? > Also, in the last post, it was recommended to assign a real IP address to > the gre tunnel... most of the examples I've read assign the IP address > eth0 uses to the gre tunnel as well. Is this correct? > Any help would be greatly appreciated. > > Dom > > > -- View this message in context: http://www.nabble.com/Red-Hat-5---Squid-2.6-Stable-13-WCCP-V2-and-GRE-tp11040402p17536223.html Sent from the Squid - Users mailing list archive at Nabble.com.
