The authorative documentaiton is squid.conf.default, or the copy found online on squid-cache.org. http://www.squid-cache.org/Versions/v2/2.6/cfgman/cache_peer.html Regards Henrik On mån, 2008-05-05 at 11:25 -0700, Tory M Blue wrote: > visolve documentation > > front-end-https > > > to enable the "Front-End-Https: On" header needed when using Squid > as a SSL frontend infront of Microsoft OWA. > See MS KB document Q307347 for details on this header. If set to auto > then the header will only be added if the > request is forwarded as a https://URL. > > So maybe the docs have been updated since, but there were no options > specified in the 2.6 configuration manual from visolve > > Thanks for the pointer! > > Tory > > On Mon, May 5, 2008 at 11:14 AM, Henrik Nordstrom > <henrik@xxxxxxxxxxxxxxxxxxx> wrote: > > On mån, 2008-05-05 at 09:23 -0700, Tory M Blue wrote: > > > > > Either I have this implemented wrong (more likely). Or the directive > > > is not quite right. > > > > Quote from the documentation: > > > > front-end-https[=on|auto] > > > > use front-end-https to enable the "Front-End-Https: On" > > header needed when using Squid as a SSL frontend in front > > of Microsoft OWA. See MS KB document Q307347 for details > > on this header. If set to auto the header will > > only be added if the request is forwarded as a https:// > > URL. > > > > Or in other words set it to auto and it will behave as you like it to. > > > > Regards > > Henrik > > > >