I am trying to configure squid wccp and cisco router but with no luck.
This is what I have done. Please check my procedure and confoguration:
for squid version 2.6Stable19 running on Fedora Core 8 64 bit with ip address xx.xx.184.178
1. I configure squid with options enable-linux-netfilter
2. in squid.conf
http_port 8080 transparent
wccp2_router xx.xx.184.177
wccp2_version 4
wccp2_forwarding_method 1
wccp2_return_method 1
wccp2_service standard 0
wccp2_address 0.0.0.0
3. modprobe ip_gre
ip tunnel add wccp0 mode gre remote xx.xx.184.177 local xx.xx.184.178 dev eth1
ip addr add xx.xx.184.178/32 dev wccp0
ip link set wccp0 up
4.echo 0 >/proc/sys/net/ipv4/conf/wccp0/rp_filter
5.iptables -t nat -A PREROUTING -p tcp -i wccp0 -j REDIRECT --to-ports 8080
6. iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-ports 8080
On Cisco router7206 npe300 with 12.2(31)
ip wccp version 2
ip wccp web-cache
!
interface fastethernet 1/0
description LAN
ip address 192.168.255.6 255.255.255.252
!
interface fastethernet 3/0
description internet connection
ip address xx.xx.184.177
ip wccp web-cache redirect out
!
ip route 0.0.0.0 0.0.0.0 192.158.255.5
Logs:
with linux cache.log I can see messages as:
wccp2HereIam: Sending to device id 0
Sending HereIam packet size 144
Incoming WCCPv2 I_SEE_YOU lenth 132
Complete packet receive
In Cisco router:
sho ip wccp web-cache
Global WCCP information:
Router information:
Router Identifier: 192.168.255.6
Protocol Version: 2.0
Service Identifier: web-cache
Number of Cache Engines: 1
Number of routers: 1
Total Packets Redirected: 201
Redirect access-list: -none-
Total Packets Denied Redirect: 0
Total Packets Unassigned: 0
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
sho ip wccp web-cache detail
Web Cache ID: xx.xx.184.178
Protocol Version: 2.0
State: Usable
Initial Hash Info: 00000000000000000000000000000000
00000000000000000000000000000000
Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Hash Allotment: 256 (100.00%)
Packets Redirected: 201
Connect Time: 01:14:03
It seems everything is working fine but configuring client browser without any proxy it is not browsing. note that if I manually define the Ip address of the transparent proxy I can browse the web.
Can anybody help me on my problem?
thank you very much,
Wennie
----- Original Message -----
From: "Adrian Chadd" <adrian@xxxxxxxxxxxxxxx>
To: "Wennie V. Lagmay" <wlagmay@xxxxxxxxxxxxx>
Cc: "Adrian Chadd" <adrian@xxxxxxxxxxxxxxx>, "squid-users" <squid-users@xxxxxxxxxxxxxxx>
Sent: Saturday, April 26, 2008 8:31:43 PM (GMT+0300) Asia/Kuwait
Subject: Re: squid and wccp
On Sat, Apr 26, 2008, Wennie V. Lagmay wrote:
> I have a question, do I need to enable ip_gre, ip_wccp on my system? using kernel 2.6.24, i enable the ip_gre does it mean it aoutmatically enables the ip_wccp?
Just ip_gre. the GRE code shipped in linux these days includes WCCPv2 packet
decoding.
HTH,
Adrian
>
> thanks
>
>
> ----- Original Message -----
> From: "Adrian Chadd" <adrian@xxxxxxxxxxxxxxx>
> To: "Wennie V. Lagmay" <wlagmay@xxxxxxxxxxxxx>
> Cc: "squid-users" <squid-users@xxxxxxxxxxxxxxx>
> Sent: Saturday, April 26, 2008 12:38:07 PM (GMT+0300) Asia/Kuwait
> Subject: Re: squid and wccp
>
> http://wiki.squid-cache.org/ConfigExamples/
>
>
>
> Adrian
>
> On Sat, Apr 26, 2008, Wennie V. Lagmay wrote:
> > Hi all,
> > Can anybody give me a step by step configuration to enable WCCP in both router and squid2.6.stable19.
> >
> > Here are the details:
> >
> > router = cisco7206VXR
> > IOS ver = 12.3 (8) T, RELEASE SOFTWARE (fc2)
> > FE0/0 = xx.xx.184.17/28
> >
> > squid:
> >
> > OS = FC8 64bit with kernel version 2.6.24.4-64.fc8 #1 SMP
> > squid version = squid-2.6Stable19
> > eth1 = xx.xx.184.22/28
> >
> > I am trying to follow the configuration in squid FAQ but it is very hard for me because this my first time to do thus kind of setup. I would highly appreciate if you can provide me a step by step configuration for cisco router and squid box to enable WCCP version 2
> >
> > Thank you and best regards,
> >
> > wennie
>
> --
> - Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support -
> - $25/pm entry-level VPSes w/ capped bandwidth charges available in WA -
--
- Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support -
- $25/pm entry-level VPSes w/ capped bandwidth charges available in WA -
