I have a question, do I need to enable ip_gre, ip_wccp on my system? using kernel 2.6.24, i enable the ip_gre does it mean it aoutmatically enables the ip_wccp? thanks ----- Original Message ----- From: "Adrian Chadd" <adrian@xxxxxxxxxxxxxxx> To: "Wennie V. Lagmay" <wlagmay@xxxxxxxxxxxxx> Cc: "squid-users" <squid-users@xxxxxxxxxxxxxxx> Sent: Saturday, April 26, 2008 12:38:07 PM (GMT+0300) Asia/Kuwait Subject: Re: squid and wccp http://wiki.squid-cache.org/ConfigExamples/ Adrian On Sat, Apr 26, 2008, Wennie V. Lagmay wrote: > Hi all, > Can anybody give me a step by step configuration to enable WCCP in both router and squid2.6.stable19. > > Here are the details: > > router = cisco7206VXR > IOS ver = 12.3 (8) T, RELEASE SOFTWARE (fc2) > FE0/0 = xx.xx.184.17/28 > > squid: > > OS = FC8 64bit with kernel version 2.6.24.4-64.fc8 #1 SMP > squid version = squid-2.6Stable19 > eth1 = xx.xx.184.22/28 > > I am trying to follow the configuration in squid FAQ but it is very hard for me because this my first time to do thus kind of setup. I would highly appreciate if you can provide me a step by step configuration for cisco router and squid box to enable WCCP version 2 > > Thank you and best regards, > > wennie -- - Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support - - $25/pm entry-level VPSes w/ capped bandwidth charges available in WA -
