> On Tue, Mar 25, 2008 at 1:23 PM, Marcus Kool > <marcus.kool@xxxxxxxxxxxxxxx> wrote: >> I wish that the wiki for RIAD is rewritten. >> Companies depend on internet access and a working Squid proxy >> and therefore the advocated "no problem if a single disk fails" >> is not from today's reality. >> One should also consider the difference between >> simple RAID and extremely advanced RAID disk systems > > Recently I've spent a fair bit of time benchmarking a Squid system > whose COSS and AUFS storage (10GB total) + access logging are on a > RAID0 array of two consumer grade SATA disks. For various reasons, I'm > stuck with RAID0 for now, but I thought you might be interested to > hear that the box performs pretty well. > > The box can handle a 600 - 700 Req/Sec Polygraph polymix-4 benchmark with > a > ~40% document hit ratio. vs the 850 req/Sec Adrian has demonstrated for those Squid releases using polygraph on slower servers. The difference is rather interesting. Thank you very much. If we can get more submissions like this we can update the wiki with actual Req/Sec performance ratings rather than the vague low/good. (Hint, hint.) > usage > Doubling the total storage to 20GB, increased the doc hit ratio to > 55%, but hit response times began to increase noticably during the top > phases. > > CPU was about 5% idle during the top phases. Logs were being rotated > and compressed every five minutes. CPU usage never > > Some initial experiments suggest that removing RAID doesn't > particularly improve performance, but I intend to do a more thorough > set of benchmarks soon. > > I'm not sure how relevant this is to your discussion. I don't know how > RAID0 performance is expected to compare to RAID5. > > I'll post here if and when I do more benchmarking without RAID. > > -RichardW. > > == Spec == > CPU: Intel(R) Celeron(R) CPU 2.53GHz > RAM: 3GB > Disks: 2 x Seagate Barracuda 160GB > Squid: 2.6.STABLE17 > Linux Kernel: 2.6.23.8 > FS: reiserfs > > == Squid Conf (extract) == > # NETWORK OPTIONS > http_port 800 transparent > > # MEMORY CACHE OPTIONS > cache_mem 152 MB > maximum_object_size_in_memory 50 KB > > # DISK CACHE OPTIONS > cache_replacement_policy lru > # TOTAL AVAILABLE STORAGE: 272445 MB > # MEMORY STORAGE LIMIT: 46694 MB > # CONFIGURED STORAGE LIMIT: 10000 MB > cache_dir coss /squid_data/squid/coss0 2000 max-size=16000 > cache_swap_log /squid_data/squid/%s > cache_dir coss /squid_data/squid/coss1 2000 max-size=16000 > cache_swap_log /squid_data/squid/%s > cache_dir coss /squid_data/squid/coss2 2000 max-size=16000 > cache_swap_log /squid_data/squid/%s > cache_dir aufs /squid_data/squid 4000 16 256 > max_open_disk_fds 0 > maximum_object_size 20000 KB > > # LOGFILE OPTIONS > debug_options ALL,1 > buffered_logs on > logfile_rotate 10 > > # MISCELLANEOUS > memory_pools_limit 10 MB > memory_pools off > cachemgr_passwd none all > client_db off >
