2.5 isn't really supported by anyone anymore; I'd suggest upgrading to the latest 2.X (which is 2.6.STABLE18 atm) or 3.X (3.0.STABLE1) releases and see if it works. Adrian On Tue, Jan 29, 2008, Gavin Hamill wrote: > Hi, > > We have a 2.5.12 installation on Ubuntu dapper which we're having > problems using with a remote SOAP web service. Squid has been happily > chugging away for over a year for our busy LAN, and this is the first > issue we've had with it. > > In short, squid passes the SOAP request from the LAN client to the > service, and squid receives a reply from said service, but squid then > passes an empty document back to the client on the LAN. > > I've made a tcpdump capture available at http://bum.net/squid.cap > > LAN client = 10... , Squid IP = 194..., Remote Service = 212... > > There are two packets with invalid checksums - I used a hex editor to > remove our user/password from the data stream. > > I notice that HTTP/1.0 has been requested by the client, yet it > specifies a Host: header - but I can't imagine this is the cause of the > issue. Any advice would be warmly welcomed! > > Cheers, > Gavin. > -- - Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support - - $25/pm entry-level VPSes w/ capped bandwidth charges available in WA -
