Adrian, Actually I didn't use wireshark at all ... I found some info on Squid not supporting HTTP 1.1 and I just disabled it ... seemed to be the solution. I *could* do the whole exercise again with wireshark of course, but I do not have X11 installed and I was not certain if wireshark would do the same in plain console mode (never used it) or does it? Cheers Bert. "Adrian Chadd" <adrian@xxxxxxxxxxxxxxx> wrote in message news:20080103125916.GC12085@xxxxxxxxxxxxxxxxxxxxxxxxxxxx > On Thu, Jan 03, 2008, Bert Moorthaemer wrote: >> Adrian, >> >> I found the problem ... Squid 3 doesn't support HTTP 1.1 ... when I >> disable >> it in IE7 then everything works just fine .. > > Please still do the wireshark dump and post results here? > There's no reason why Squid should be causing a problem as things should > degrade > to HTTP/1.0; the trace will show whats breaking. > > > > Adrian > >> >> Bert. >> >> "Adrian Chadd" <adrian@xxxxxxxxxxxxxxx> wrote in message >> news:20080102012737.GD18760@xxxxxxxxxxxxxxxxxxxxxxxxxxxx >> > On Tue, Jan 01, 2008, Bert Moorthaemer wrote: >> >> Hi all! >> >> >> >> I can't access the WMP 11 Album Info with Squid-3.0STABLE1. I am using >> >> the >> >> FreeBSD port with PF transparent proxying. Can anybody shine a light >> >> on >> >> this? Because there is little to find about this problem on the Net. >> > >> > Crack out wireshark and look at the HTTP exchange? >> > >> > >> > >> > >> > adrian >> > >> > >> > >> >> > > -- > - Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid > Support - > - $25/pm entry-level VPSes w/ capped bandwidth charges available in WA - >
