Search squid archive

Squid Performance (with Polygraph)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all, 
	I'm busy testing a squid box with 8xSATA drives, 4gig of DDRII
memory and 2x 2.6gig dual core processors. I'm using the basic datacomm test
from polygraph. I've configured 6 of the drives to use COSS, and the other
two diskd (I've also done basic ufs tests). During all of the tests below
I'm using 96mb for cache memory...

If I run 600RPS the unit handles it fine, for about 23 minutes - at that
stage network connections start rising very quickly (and eventually running
out) and responses on the polygraph client slow down until it dies. If I use
1200 RPS it happens after about 10 minutes. 

Then if I use a single IDE drive (just using ufs), at 600RPS it handles fine
for about 14 minutes at which stage it dies.

My main question is what is it that's causing the connections to rise. To me
it's that the responses are taking longer to fulfill - the reason for this I
assumed would be the disk drive. But how is the IDE drive going for so long?
96mb of memory is filling up way faster than that, and I can see it
accessing the drive. The transfers per second and transfer speeds on the
drives don't change when it begins to fail, and neither do any real squid
stats...

I've also tested just having a 500mb cache on one IDE drive, filling it
first and then doing this - it also lasts just as long (having to delete
files as well etc)...

Any idea what's happening at that stage? 

Thanks for the help
Dave


[Index of Archives]     [Linux Audio Users]     [Samba]     [Big List of Linux Books]     [Linux USB]     [Yosemite News]

  Powered by Linux