On Thu, Nov 01, 2007 at 03:06:38AM -0700, Robin-Vossen wrote: > My /etc/squid/squid.conf file Is written by myself. And I think I > made a mistake somewere since when I start Squid it crashes. Did you check the squid logs to see what the problem was? The cache log is the one you'll be looking for. Since you didn't define a value for it it'll use the default, which is most likely: /var/log/squid/cache.log You can configure it explicitly using this syntax in the squid config: cache_log /var/log/squid/cache.log (on that subject, I'd also recommend making sure you have an access_log configured as well) > #Squid Config > #Used Doc http://www.visolve.com/squid/squid26/contents.php > > http_port 5629 > cache_mem 75 MB > visable_hostname firegate > cache_dir ufs /var/cache/squid 500 16 256 > offline_mode on > maximun_object_size 102400 KB > reload_into_ims on > pipeline_prefetch on > > ##Define ACL > acl WAN src 192.168.24.0/255.255.255.0 > acl LAN src 192.168.42.0/255.255.255.0 > acl all src 0.0.0.0/0.0.0.0 > acl busness_hours time M T W H F 8:30-18:00 > acl break_time time M T W H F 11:00-14:00 > acl BadSites dstdomain "/usr/local/etc/restricted-sites.squid" > acl BadWords url_regex -i "/usr/local/etc/restricted-keywords.squid" > acl BadFiles urlpath_regex -i "/usr/local/etc/restricted-files.squid" > acl ftp proto FTP > acl http proto HTTP > acl ssl proto SSL > acl ssh_port port 22 443 10000 > acl Admin-IP src "/usr/local/etc/Admin-IP.squid" > acl Admin-MAC arp "/usr/local/etc/Admin-MAC.squid" > acl User-IP src "/usr/local/etc/User-IP.squid" > acl User-MAC arp "/usr/local/etc/User-MAC.squid" > > ##Laws > allow ssh_ports LAN CONNECT > deny !USer-IP !Admin-IP > deny !User-MAC !Admin-MAC > deny !break_time BadSites User-IP > deny !break_time BadWords User-IP > deny !break_time BadFiles User-IP > allow User-IP business-hours > deny all > > Thats it.. If this is a verbatim dump of your config, then the first problem I spotted was that you define an acl called "busness-hours", but then later reference "business-hours". The squid log should give you some info about the problem. If you still can't solve it, include the relevant part of the log when you ask for help here, as not everyone will copy your config to a test squid to see what happens. It's also usually a good idea to include the exact version number of the squid you're using.
