Hi Yogesh,
Yogesh Patil wrote:
Hi, there
I would like to configure squid cache for ISP setup only with 1
NIC and 1 Public IP (live IP), so now the question is, how should i
configure the squid cache server, with this, as i am having no
previous experience with the squid, anybody please tell me procedure,
else let me know the website where i can get tutorial for the same.
Of course you can configure Squid with just 1 NIC card and I public IP.
You need either a load balancer sitting in front of Squid or you need
your router to forward web request to your Squid box. I am guessing that
you want your Squid to run transparently too.
If configuring squid with 1 NIC & 1 public ip is not possible,
please tell me the procedure for configuring squid cache with 2
NIC & 2 PUBLIC IP (not a single private IP),
* I am connecting to the internet through dedicated leased line.
Do you have a router connected to your leased line? If so, then setup
your router to forward web requests to your single NIC Squid box.
Since you mentioned using this Squid box for an ISP, will your customers
also be having Public IP addresses or will they be having private
address running under NAT?
Which OS will you be using on what hardware?
Thanks in advance
Thanking you...
--
With best regards and good wishes,
Yours sincerely,
Tek Bahadur Limbu
System Administrator
(TAG/TDG Group)
Jwl Systems Department
Worldlink Communications Pvt. Ltd.
Jawalakhel, Nepal
http://www.wlink.com.np
http://teklimbu.wordpress.com
