What is the squid vershion u r running. if it is squid 2.6 pls add below line. http_port 3128 transparent acl mynet src 192.168.101.0/24 http_access allow mynet if it is SQUID 2.5 , you may nedd something like these. http_port 3128 cache_mem 64 MB cache_dir ufs /var/spool/squid 100 16 256 cache_access_log /var/log/squid/access.log cache_log /var/log/squid/cache.log cache_store_log /var/log/squid/store.log # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # Example rule allowing access from your local networks. Adapt # to list your (internal) IP networks from where browsing should # be allowed acl mynet src 192.168.101.0/24 http_access allow mynet httpd_accel_host virtual httpd_accel_port 80 httpd_accel_with_proxy on httpd_accel_uses_host_header on in BOTH cases, you nedd this below line as well. iptables -t nat -A PREROUTING -p tcp -i eth2 --dport 80 -j REDIRECT --to-port 3128 eth2 is the interface attached to LAN. pls change it accordinly. pls read below. http://www.squid-cache.org/mail-archive/squid-users/200708/0232.html On 10/9/07, Hemant Raj Chhetri <hemant@xxxxxxxxxx> wrote: > Hi Masters, > I am trying to implement squid as > transparent proxy. I have installed squid on freebsd 6.1. > The router which I am using is cisco 1841 series router. I > am using wccpv2. Could you please help me out with how > could I make it a transparent proxy. > > Thanking you, > > Hemant. > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > This footer space is available to carry your advertisements unobtrusively. Please contact 02-3226999 or email webmaster@xxxxxxxxxx for advertisement programs available. > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > -- Thank you Indunil Jayasooriya
